662650
18
Zoom out
Zoom in
Previous page
1/24
Next page
- 18 -
English
Installation of the camera
Please charge the battery before the fi rst use.
Connect the DC 5 V charging interface with USB charger.
During charging the indicator lights red.
Mounting the camera
Open the screws in the holder and mount it at the seat post. Use a philips screwdriver.
Screw the holder that it does not twist or slip.
After that the camera can be mounted with the quick lock.
Follow the instruction on the rear side of the camera.
Rotate the camera 90° clockwise and insert the pin on the back into the hole marked
with an arrow.
After that rotate the camera 90° counterclockwise and lock the camera in the holder.
Now the camera is ready for operation.
Mounting on/off control line
Fixing the on/off control line on the bicycle handlebar.
Route the cable to the bicycle frame.
Fix the button on the handlebar with cable ties.
The USB connector of the control line is useful for both USB sockets.
For the xing of the control line use cable ties.
Mounting charging cable
A charging cable is supplied with the camera to charge the battery on the move.
Route the cable on the bicycle frame to the bicycle dynamo.
There are 2 types of wiring: one-wire and two-wire.
In case of on-wire cableing one pole of the dynamo is connected to the metal frame
of the bicycle. Connect the black wire to the frame.
Installation
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dnt BikeCam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dnt BikeCam in the language / languages: English, German as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info