67777
8
Zoom out
Zoom in
Previous page
1/16
Next page
RA50
Filters on CH 3 and CH4
CH3 and CH4 include high pass filter (HP).
The slope of the filter is 12 dB / octave. The filter
can be switched off if you want to run the amplifier
in full range mode.
The HP-filter can be used in three different
frequency ranges by changing a switch in the bot-
tom plate of the amplifer. The switch has three
positions giving the following frequency ranges:
x1 = 50 - 140 Hz
x5 = 250 Hz - 700 Hz
x50 = 2,5 kHz - 7 kHz
The HP-filter is used when running a 2- or 3-way
system in active mode. See the examples later in
the manual.
Switches
in bottom
plate
x1
50 -140 Hz
x5
250 - 700 Hz
x50
2,5 - 7,0 kHz
CH3 CH4 HP filter
Frequency selector
Filters on CH 5, sub channel
CH5 include low pass filter (LP) and subsonic filter.
The slope of the LP-filter is 12 dB / octave and 18
dB for the subsonic filter. The subsonic filter can be
switched off if you dont want any limitation in the
lower frequency range.
The LP-filter allows low frequencies only and
blocks higher frequencies. The filter can be varied
from 40 - 125 Hz, a typical setting is 50 – 80 Hz.
The subsonic filter is used to take away the very
deepest frequencies from a bass box. The x-over
frequency is 25 Hz.
Grand Bass is used to increase the bass volume
with a center frequency of 40 Hz. You can select
the amplification between 0 dB ( no amplification )
and +18 dB (full amplification). This function is used
to compensate for the bass box function and to
adjust for your own taste of bass. Set level control
at 0 dB if you want it to be inoperative.
The phase control on the sub channel (CH5) can
be set continuously from 0 - 180 degrees. This is
very useful when you want to adjust the bass sound
for best front stage image. Start on 0 and turn the
control slowly clockwise until you experience that
the bass sound is coming from the front. If you dont
get the result you want, also try to phase reverse
the subwoofer connections and make a new
adjustment. Using the remote level control box you
can adjust the phase from the front seat.
Remote Bass level and phase control box
The amplifier includes a
remote control unit. With
this unit it is possible to
adjust the bass level and
phase on the subwoofer
channel (CH5), from the
front seat. Connect the
cable between the
amplifier socket and the
socket on the remote box.
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DLS RA 50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DLS RA 50 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info