749166
17
Zoom out
Zoom in
Previous page
1/20
Next page
32 www.dkn-uk.com www.dkn-uk.com 33
Belt Adjustment
The running belt may occasionally need adjustment. If so, place the treadmill on a level surface.
Turn the treadmill on at a speed of 6-8 km/h. Observe in which direction the running belt is
deviating. Before adjusting the belt make sure you turn the treadmill off, remove the safety key
and unplug the power cord.
If the belt has drifted to the right, unplug the safety
key and the power cord and turn the right adjusting
bolt a 1/4 turn clockwise. Then insert the power
cord and the safety key, turn the treadmill on and
set it to run at 8 km/h, watch to see where the belt
position moves to. Repeat above steps until the
running belt is positioned in the middle.
If the belt has drifted to the left, unplug the safety
key and the power cord, and turn the left adjusting
bolt a 1/4 turn clockwise, then insert the power
cord and the safety key, turn the treadmill on and
set it to run at 8 km/h, watch to see where the belt
position moves to. Repeat above steps until the
running belt is positioned in the middle.
The treadmill belt will gradually lose tension after
a period of time of use. If the belt starts to slip
then unplug the safety key and the power cord.
Turn the two adjusting bolts a 1/4 turn clockwise,
and insert the safety key and power cord. Then
start the treadmill and test to conrm if the belt no
longer slips. Repeat the above steps until the belt
is moderately tight and does not slip.
Incline Calibration
To calibrate the incline, press and hold INCLINE+ and INCLINE- keys for 3 seconds. The
treadmill will now be in a calibration mode.
DO NOT OPERATE THE TREADMILL AND DO NOT STAND ON THE MACHINE DURING
THE CALIBRATION PROCESS.
While calibrating, the machine will move to its highest incline position and then return to 0% incline.
When the treadmill comes to a complete stop, the calibration process is nished.
Customer Support
Should you require any assistance regarding
this product, we are here to help. Please
gather the following information and then
contact us using the details on this page:
Serial No. - This can be found on a label
on the product itself
Original purchase date
Place of purchase
Information about the place and conditions
of use
Precise description of the issue or defect
In the case of an issue with the electrics, the
EnduRun provides error codes on the console.
Please note the code your machine displays
so we can help with diagnosing and resolving
the issue.
Important
Please retain your sales receipt as DKN
Customer Care may request proof of purchase
to validate eligibility for warranty service.
Warranty cover starts from the date shown
on the proof of purchase. Further warranty
information can be found on the next page.
The best way to contact us is via the website:
www.dkn-uk.com/contact-us
DKN UK
94 Cleveland Street
London
W1T 6NW
Email: support@dkn-uk.com
17


Need help? Post your question in this forum.

Forumrules
1

Forum

dkn-endurun

Reset search

  • Set up machine - not working- just saying driver signal not received- any ideas Submitted on 29-5-2022 at 15:03

    Reply Report abuse
  • Treadmill power cable was pulled out when in use
    It will not power up now Submitted on 16-1-2022 at 14:40

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN EnduRUN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN EnduRUN in the language / languages: English as an attachment in your email.

The manual is 4,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info