749168

DKN AiRUN-Z Manual

48
Zoom out
Zoom in
Previous page
1/54
Next page
Trouble Shooting
ERROR POSSIBLE CAUSE CORRECTION
Display does not power on Power plug not connected to the mains Plug in power cable
Power switch not in ‘ON’ position Turn power switch to ‘On’ position
Socket has no power Check AC (mains)
Treadmill fuse blown Replace fuse
Faulty MCB Check and or replace MCB
Connections base to upper console Replug all connections
Faulty display Replace display
Partial display LED Faulty LED Strip Replug all console connections
Faulty LED driver IC Replace Display
Runs with shocks Running belt tension Adjust running belt tension
Running belt alignment Adjust running belt aligment
Insuffi cient driver torque djust torque potentiometer
E-01 Safety key not positioned Position safety key to ‘On’ position
Magnet loose Replace magnet in safety key
E-013 Poor wiring contact Replug all wiring connections between
upper and lower
Cabling connection, short circuit or open circuit Replug all plugs on MCB
MCB error Replace MCB
E-02 Stall: impact protection or motor blocked Turn motor manually for few rotations,
and check again
IGBT (Transistor) damaged or broke Replace IGBT
AC voltage too high Check AC (mains) electrical circuit
E-04 Incline motor connection error Replug all incline motor connections
Incline motor blocked Restart treadmill
Incline motor error Replace incline motor
E-05 Over current protection Check incoming AC voltage
Mechanical part blocking Check all moving parts (rollers,
bearings, belt…)
Burned motor Replace motor
Burned MCB Replace MCB
E-06 Internal motor circuit error Replug all motor connections
Open motor circuit Replace motor
E-10 Abnormal peak current: torque too high Adjust torque potentiometer
Motor wearing out Replace motor
Mechanical part blocking Check all moving parts (rollers,
bearings, belt…)
Belt does not run properly Lubrication Apply lubrication (silicon spray)
Running belt tension too high Adjust belt tension
Belt is slipping Too much lubrication Try to remove overspill using dry towel
Running belt tension too loose Adjust belt tension
Motor belt too loose Adjust motor belt tension
… 48 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN AiRUN-Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN AiRUN-Z in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info