749168
14
Zoom out
Zoom in
Previous page
1/54
Next page
! Note: The treadmill should be placed on a level surface. If the treadmill is not level the belt will
continuously track to the low side of the treadmill.
1. Belt adjustment bolts are located at the rear of the treadmill, as shown above.
2. Belt moving (tracking) to the right:
Start the treadmill and set at 1.5 kph. Using an allen key wrench, turn the right adjustment bolt
clockwise 1/4 of a turn. Continue adjustments at 1/4 of a turn until belt returns to the center. Conti-
nue to run the treadmill for a short period of time monitoring the belt movement to ensure you have
not made an over adjustment.
3. Belt moving (tracking) to the left:
Start the treadmill and set at 1.5 kph. Using an allen key wrench, turn the right adjustment bolt
clockwise 1/4 of a turn. Continue adjustments at 1/4 of a turn until the belt returns to the center.
Continue to run the treadmill for a short period of time monitoring the belt movement to ensure you
have not made over adjustment.
4. Centring the running belt:
When you run, you may push off harder with one foot than with another. The severity of the defl ec-
tion depends on the amount of force that one foot exerts in the relation to the other. This defl ection
can cause the belt to move off - centre. This defl ection is normal and the running belt will center
when no body is on the running belt. If the running belt remains consistently off -centre, you will
need to centre the running belt manually.
_______________________________________________________________________________
! Importante: El aparato debe ser en un superfi cie plano. Si el aparato no esta estable, la cinta se
ira mas hacia la parte mas inferior del aparato.
1.Los tuercos de la cinta se encuentran al parte trasera del aparato como indicado.
2.Si la cinta se ira demasiado a la derecha :
Ponga el aparato en marcha y instityuelo en 1.5 km/h. Vuelva con ayuda de una llave inglesa el
tornillo derecho un cuarto hacia derecho. Vuelva el tornillo siempre un cuarto al derecho hasta que
la cinta se encuentra de nuevo al medio.
Trate el aparato y mantenga los movimientos de la cinta para asegurarse que no ha instituido la
cinta demasiado lejos
3.Si la cinta se ira demasiado a la izquierda:
Ponga el aparato en marcha y instityuelo en 1.5 km/h. Vuelva con ayuda de una llave inglesa el
tornillo derecho un cuarto hacia derecho. Vuelva el tornillo siempre un cuarto al derecho hasta que
la cinta se encuentra de nuevo al medio.
Trate el aparato y mantenga los movimientos de la cinta para asegurarse que no ha instituido la
cinta demasiado lejos
4. Centrar la cinta de correr:
Cuando corres, puedes empujar con más fuerza con un pie que con otro. La gravedad de la de-
exión depende de la cantidad de fuerza4 que ejerce un pie en la relación con el otro. Esta desvia-
ción puede causar que la correa se mueva fuera del centro. Esta desviación es normal y la correa
de correr se centrará cuando no haya ningún cuerpo sobre la correa de correr. Si la banda de
correr permanece constantemente descentrada, deberá centrar la correa de correr manualmente.
Regulierung des Rollteppichs - Belt adjustment - Posicion cinta -
Ajustement de la bande de course - Regolazione di tapetto - Afstellen van het looptapijt
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN AiRUN-Z at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN AiRUN-Z in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 7,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info