513388

DKN AiRun X Manual

121
Zoom out
Zoom in
Previous page
1/124
Next page
121
Code Description Processing
E01
Communication error. The control board and
computer are not communicating correctly.
The machine stops and goes into fault status, computer shows “E1”, and the alarm beeps
three times. Possible causes: check all the connection points between the console and
controller. Make sure all plugs are well connected. Check all the wires for damage. If this
fails, change the connector wires.
E02
Abnormal voltage. Power or voltage situation that can
cause damage to the motor drive circuit.
Start and stop fault status. The computer beeps 9 times and shows “E2”. Treadmill goes
into the ready mode and restarts. Possible causes: low power or voltage, or faulty
controller. Check all motor wires for correct connection.
E03
Speed sensor error.
Stops and go into fault status. Computer shows “E03”. Other areas show blank. After 10
seconds the machine will go into ready mode, and can be restarted.
Possible causes: the computer is not receiving motor speed sensor feedback for more
than 3 seconds: check sensor plug and motor connection wires. Check the controller.
E05
Over-current protection.
Stops and goes into fault status, computer shows “E05”. Other areas show blank. After 10
seconds the machine will go into ready mode, and can be restarted.
Possible causes: system encounters overvoltage and goes to self-preservation. Moving
parts may be blocked. Check and adjust the machine and restart. Check motor or
controller for burning smell. If so, change motor and/or controller. Check whether the
power voltage is too low or not to the standard and retest with the correct voltage.
E06
Controller self-check error.
Computer shows "E06". Possible causes: the controller wires are not connected well,
check and reconnect or change.
E08
EPROM (Data memory error)
Computer shows“E08”. Possible causes: the controller wires are not connected well,
check and reconnect or change.
… 121 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DKN AiRun X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DKN AiRun X in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info