704359
8
Zoom out
Zoom in
Previous page
1/30
Next page
RONIN-SC
User Manual
6
© 2019 DJI OSMO All Rights Reserved.
Mounting a Camera
Make sure to prepare the camera before mounting it to Ronin-SC. Remove the lens cap and make sure
the battery of the camera and memory card are already inserted.
1. The three axes of the gimbal are locked by default. Unlock the three axes, adjust the gimbal to the
position as shown, and lock the three axes again.
2. If required, attach the riser plate* to the bottom of the camera using a athead screwdriver.
1
2
3
2
1
Riser Plate
* Riser plate is required in the following scenarios:
When using a small and lightweight camera such as a Sony A6300 camera.
When using a lens with a large diameter such as a Sony A7M3 camera with a 16-35 mm f/2.8 GM lens.
When used with a focus motor.
3. Attach the dovetail plate and lens support . Move the slider to the front of the plate. The camera
lens and the arrow on the dovetail plate must face the same direction. Mount the camera according to
the indicators on the dovetail plate. USE THE LENS SUPPORT FOR OPTIMAL PERFORMANCE.
Dovetail Plate
1
2
Slider
Lens Support
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin-SC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin-SC in the language / languages: English as an attachment in your email.

The manual is 10,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info