653255
43
Zoom out
Zoom in
Previous page
1/51
Next page
Ronin-MX
User Manual
©
2016 DJI All Rights Reserved.
41
Camera Type
It is recommended to select the DSLR Camera, Mirrorless or RED Camera according to
the mounted camera to obtain optimized settings for the Stiffness, Strength, Outlter and
Control values.
The default settings for the Strength, Outlter and Control values are complicated and
should not be adjusted unless you are an advanced user.
Adjust Gimbal Roll
Tap to ne tune the gimbal’s roll if you notice the roll axis is not level.
SmoothTrack Settings
Deadband and the speed can be adjusted separately for pan and tilt axes.
Remote Controller Settings
Deadband, Maximum Speed and the Smoothing can be adjusted separately for pan and
tilt axis control.
Endpoint Settings
The endpoints for the pan and tilt axes can be adjusted to limit the maximum left/right or
up/down angles.
Camera Base Invert
Tap to allow the camera mount on the gimbal to invert.
TIPS
When the camera is mounted upside-down, enable the Flip Image function by
tapping
> Flip Image to obtain a proper image.
Motor Kill
When the Motor Kill Switch is activated, the Ronin-MX is still powered on even though the
motors are powered off. This allows you to adjust the gimbal or camera without having
to turn it off completely. Prior to turning off the Motor Kill Switch, make sure the gimbal is
positioned in the standard operating position.
WARNING
Do not activate Motor Kill during ight.
Gimbal Calibration
Only calibrate the gimbal when the Ronin-MX’s axes are drifting.
Place the aircraft in a steady at area before performing the calibration. The Ronin-MX
will be powered off and powered on again automatically when calibration is complete.
Observe the roll axis position and recalibrate as needed if the roll axis is off level.
Ensure there is nothing obstructing the gimbal’s movements during calibration.
Balance Test
Tap to check the balance status of the tilt and roll axis. Ensure there is nothing obstructing
the gimbal’s movements.
Default Settings
Tap to restore all the gimbal settings to the default settings.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin-MX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin-MX in the language / languages: English as an attachment in your email.

The manual is 29,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DJI Ronin-MX

DJI Ronin-MX Quick start guide - English - 2 pages

DJI Ronin-MX Quick start guide - German - 2 pages

DJI Ronin-MX User Manual - German - 51 pages

DJI Ronin-MX Quick start guide - Dutch - 2 pages

DJI Ronin-MX User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info