612035
25
Zoom out
Zoom in
Previous page
1/35
Next page
Ronin-M
User Manual
©
2015 DJI. All Rights Reserved.
25
The thumb controller and the remote operator control sticks have a Deadband, Maximum Speed, and
Smoothing adjustment, all of which can be set independently.
Endpoint: Pan axis endpoints can be adjusted independently for left and right movement when used with 
a remote control  or the thumb controller. Tilt axis endpoints can be adjusted independently for up and 
down movement when used with a remote control or the thumb controller.
If the ability to rotate 360˚ on the pan axis is needed, simply adjust the endpoints for pan to 0. If endpoints 
are set to 0 for 360˚ pan ability, then the "Test Pan Endpoint" function will not change the pan axis.
The pan and tilt endpoints can be tested. Ensure that the camera is unobstructed when clicking the test 
buttons.
Controller Priority: If both input devices simultaneously send control signals to the gimbal, the input from
the selected controller will take priority and will control the device at that given time.
Viewer Menu: The Viewer Menu provides essential live data for monitoring the Ronin-M’s electronics and
feedback from the motors. Power is indicated for each axis. The current angle of each axis is also indicated.
Push Mode Mode: Enable Push Mode to allow the pan and tilt axes to be adjusted by hand when the 
Ronin-M is turned on.
Calibrate System:Calibrate System is only used if you notice any kind of drift in any of the axes. To 
calibrate the system, place the Ronin-M on the tuning stand and make sure it is completely steady.
Ensure a 90 degrees movement of the camera with the lens pointing straight down is possible without 
any interference from video monitor wires during the movement. Then tap the Calibrate System button 
and let the process nish before picking up the Ronin-M. Do not move the Ronin-M during calibration. 
Restart the Ronin-M after calibration is complete.
Auto Tune Stability: The Auto Tune Stability button allows for automatic adjustment of each motor’s 
stiffness settings (as relayed from the sensors and interpreted by the Ronin-M) to accomplish an
optimized setting.
Default: Click here to restore all settings to the factory defaults.
2. Control
DJI PC / MAC Assistant Tuning
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin M in the language / languages: English as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info