612035
21
Zoom out
Zoom in
Previous page
1/35
Next page
Ronin-M
User Manual
©
2015 DJI. All Rights Reserved.
21
More Menu
Briefcase Mode
When Briefcase Mode is switched on, the Ronin-M will be able to seamlessly transform into this
operation mode. With Briefcase Mode turned off, the Ronin-M will allow the camera to roll when the
Ronin-M is tilted past the standard roll axis parameters.
Motor Kill
When the Motor Kill switch is activated, the Ronin-M is still powered on, but the motors will be powered
off. This will allow an adjustment to the gimbal or camera without having to turn it off completely.
Prior to turning off the Motor Kill switch, make sure the gimbal is positioned in the standard operating
position. The Motor Kill switch can also be used if the gimbal operator experiences an issue or needs 
to make a quick mechanical adjustment to the gimbal or camera setup.
Roll Control
When the Roll Remote Control is off, the roll axis movement cannot be controlled by a remote control 
or the thumb controller.
Silent Mode
Enable Silent Mode to reduce the level of noise that is created by the motors in environments such as a
quiet room. By enabling silent mode, larger and sudden gimbal movements may not be as accurately
stabilized during use in situations such as running when silent mode wouldn’t really be needed. Use
silent mode in quiet conditions where light motor noise may be an issue during audio recording.
Otherwise, it is recommended to leave silent mode off.
Internal Receiver
When the Internal Receiver is off, the gimbal cannot be controlled by a remote control or the thumb
controller, and can only be controlled by other devices via a D-Bus or Lightbridge connection.
Calibrate Center
If the Ronin-M’s pan axis is off-center, you can recalibrate the true center of the Ronin-M using this 
switch. Using a remote control, position the pan axis at dead center, then tap the Calibrate Center 
button. Tap “Center” again in the pop-up to conrm. Restart the device after recalibrating the center.
Calibrate System
Calibrate System is only used if you notice any kind of drift in any of the axes. To calibrate the system, 
place the Ronin-M on the tuning stand and make sure it is completely steady. Ensure a 90 degrees 
movement of the camera with the lens pointing straight down is possible without any interference from
video monitor wires during the movement. Then tap the Calibrate System button and let the process 
nish before picking up the Ronin-M. Do not move the Ronin-M during calibration. Restart the Ronin-M 
after calibration is complete.
Restore Default Settings
This will restore all of the factory default settings that can be congured through the DJI Assistant app.
Device List
To force the DJI Assistant App to nd the Ronin-M, open the "Device List" and the app will search for 
Bluetooth devices it recognizes.
DJI Ronin-M Assistant App Tuning
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Ronin M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Ronin M in the language / languages: English as an attachment in your email.

The manual is 10,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info