677826
66
Zoom out
Zoom in
Previous page
1/68
Next page
Appendix
66
©
2018 DJI All Rights Reserved.
Phantom 4 Pro / Pro+ Series User Manual
Method 1: Using DJI GO 4
Connect the remote controller and DJI GO 4, where you will be reminded if a new firmware update
is available. To start updating, connect your mobile device to the internet and follow the on-screen
instructions.
Method 2: Using DJI Assistant 2
When the aircraft and the remote controller are connected, you can update both of them simultaneously
with DJI Assistant 2 (only for Phantom 4 Pro V2.0, where separate updating is also supported). Follow the
instructions below to update the rmware through DJI Assistant 2:
1. With the remote controller and the aircraft powered off, use a Micro USB cable to connect the
remote controller to the computer through the USB port.
2. Power on the remote controller and aircraft.
3. Launch DJI Assistant 2 and log in with your DJI account.
4. Select your product icon and click on “Firmware Update” on the left.
5. Select the required rmware version.
6. Wait for the rmware to be downloaded and the rmware update will start automatically.
7. Restart the aircraft and the remote controller after the rmware update is complete.
Method 3: Using a microSD Card (only for the GL300K remote controller)
1. Visit the ofcial DJI website and go to the Phantom 4 Pro/Pro+ page to download the latest rm-
ware to a microSD card.
2. Insert the microSD card into the microSD card slot of the remote controller.
3. Power on the remote controller, enter System Settings > System Update, and click Local Update
on the top-right corner. The latest rmware will show on the microSD card. Click Update to start
updating.
The rmware update will take around 15 minutes. It is normal that the gimbal will go limp, the
aircraft status indicator blinks abnormally and the aircraft reboots. Wait patiently until the update
is complete.
Ensure the computer has access to the Internet.
Ensure the battery level is adequate for the Intelligent Flight Battery and the remote controller.
Do not disconnect the aircraft from the computer during rmware upgrade.
Intelligent Flight Mode
Intelligent Flight mode includes Course Lock, Home Lock, Point of Interest (POI), Follow Me and
Waypoints features to assist users to capture professional shoots during the ight. Course Lock
and Home Point lock ensure the lock of aircraft orientation, sparing the user to focus more on other
operations. Point of Interest, Follow Me and Waypoints mode enable aircraft to y automatically ac-
cording to the pre-set ight maneuvers.
Course Lock
Lock the current nose direction as the aircraft’s forward direction. The aircraft will
move in the locked directions regardless of its orientation (yaw angle).
Home Lock Pull the pitch stick backward to move the aircraft toward its recorded Home Point.
Point of Interest
The aircraft will orbit around the subject automatically to allow the operator to be
more focus on framing their shoot on the subject in Point of Interest.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Phantom 4 Pro Plus Series V 1.6 - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Phantom 4 Pro Plus Series V 1.6 - 2018 in the language / languages: English as an attachment in your email.

The manual is 27,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info