653250
66
Zoom out
Zoom in
Previous page
1/74
Next page
64
©
2016 DJI All Rights Reserved.
MATRICE 600
User Manual
of the center frame, arrange the gimbal cables, and then re-mount the lower cover of the center
frame. DO NOT damage the cables.
4. Replace the original dampers of the gimbal with the new dampers in the accessory pack. Then
replace the original gimbal brackets with the new ones. Insert and tighten the eight M3x8 screws.
5. Mount the four new brackets to the expansion mounting rod at the bottom of the center frame.
Adjust the gimbal to the center of the aircraft. Then insert and tighten the four M3x8 screws.
6. Connect the other ends of the gimbal video cable (7-pin) and gimbal attitude cable (CAN) to the
corresponding ports on the Z15 series GCU.
7. Connect the XT30 connector of the power distribution cable in the accessory pack to the XT30
cable at the bottom of the center frame. Connect the other XT30 connector of the power distribution
cable to the power cable of the retractable module. Connect the XT60 connector to the power
cable of the Z15 series GCU.
The Z15 series gimbal cables are only for using the Z15 series gimbal with the Matrice 600.
DO NOT mix up the Z15 series gimbal cables with other cables.
Be sure to mount the gimbal to the center of the aircraft to avoid affecting ight performance.
Gimbal Connection Illustrator
Ronin-MX
CAN1
CAN1*
CAN
PWR HDMI
HDMI
OR
HDMI
VIDEO OUTGIMBAL
AV
A3 Flight Controller
Lightbridge 2 Air System N1 Video Encoder
Ronin-MX SRW-60G Transmitter
SRW-60G Receiver
FPV Camera
When using the Ronin-MX, set the App Output Mode in the DJI GO app to display the image on your
mobile device from the camera used with the Ronin-MX. Launch the DJI GO app > Camera View >
> Disable EXT Port, adjust the Bandwidth Allocation to ensure that the “HDMI” percentage is
more than 0%, and then set the App Output Mode to HDMI.
*You can connect the CAN cable to
the CAN Hub on the GPS cable.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Matrice 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Matrice 600 in the language / languages: English as an attachment in your email.

The manual is 26,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info