653250
60
Zoom out
Zoom in
Previous page
1/74
Next page
58
©
2016 DJI All Rights Reserved.
MATRICE 600
User Manual
4. Use a pin to press and hold the SET button while powering on one of the Intelligent Flight
Batteries, releasing the button when the battery powers on. The remaining batteries will power on
automatically (if the remaining batteries do not automatically power on, connect your mobile device
to the remote controller and follow the on-screen tips in the DJI GO app). The LED will blink yellow
quickly. Press the SET button again. Auto calibration will begin and the LED will blink yellow slowly.
DO NOT obstruct any moving parts during auto calibration.
5. During calibration, the left landing gear leg will raise and lower, followed by the right landing gear leg.
6. After calibration, both the left and right landing gear legs will be lowered and the LED will display a
solid green light. This indicates that the landing gear is working properly.
7. Connect both springs to the legs and the center frame.
If the LED is solid yellow after calibration, a problem has occurred. Ensure that the servos
are mounted correctly and then try again.
Avoid obstructions during calibration. If the landing gear was obstructed, recalibration will
be required, per the above steps.
If the “R” and “L” servo cables are reversed, travel will not be measured correctly. Fix the
connections and recalibrate the landing gear using the above steps.
Landing gear servo travel has been pre-calibrated. Mechanical adjustment of the servo
travel is not recommended.
LED Description
— Solid Green System normal
Blinking Green Rapidly Calibration required
Blinking Green Slowly Recalibration required
— Solid Yellow Calibration failed
Blinking Yellow Rapidly Enter calibration mode
Blinking Yellow Slowly System calibrating
— Solid Red Servo stalled
Blinking Red Rapidly Unsafe startup alert
Blinking Red Slowly Input signal abnormal
Specications
Operating Voltage 6S LiPo Input Signal PWM (High-Pulse Width 800 - 2200us)
Operating Current Max 1 A @ 6S LiPo Output Signal
PWM (Mid Position is 1520us) in 90
Hz
Operating
Temperature
-20° to 70° C Output Voltage 6 V
Total Weight 742 g Servo Travel 150° (Min 120°)
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Matrice 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Matrice 600 in the language / languages: English as an attachment in your email.

The manual is 26,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info