653250
33
Zoom out
Zoom in
Previous page
1/74
Next page
©
2016 DJI All Rights Reserved.
31
MATRICE 600
User Manual
Status LED Alarm Remote Controller Status
Solid Red chime
The remote controller is set as Master but is not
connected to the aircraft.
Solid Green chime
The remote controller is set as Master and
connected to the aircraft.
Solid Purple 2 beeps
The remote controller is set as Slave but is not
connected to the aircraft.
Solid Cyan 2 beeps and chime
The remote controller is set as Slave and
connected to the aircraft.
Blinking Red 1 slow beep repeating
Remote controller error. Refer to the DJI GO app
for details.
RTH Status LED
Sound
Aircraft Status
Solid White chime RTH procedure begins.
Blinking White 1 beep repeating Sending RTH command to the aircraft.
Blinking White 2 beeps repeating Aircraft RTH in progress.
Linking the Remote Controller
The remote controller is linked to your aircraft by default. Linking is only required when a new remote
controller is used for the rst time. Follow these steps to link a new remote controller:
1. Power on the remote controller and connect it to your mobile device. Then power on the aircraft.
2. Go to the DJI GO app > Camera View > > Remote Controller Settings > Linking Remote
Controller.
Remote Controller Settings
Remote Controller Calibration
Stick Mode
Button Customization
Gimbal Pitch/YawC1
C2 Not Defined
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back of the RC.
Linking Remote Controller
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Matrice 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Matrice 600 in the language / languages: English as an attachment in your email.

The manual is 26,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info