653249
21
Zoom out
Zoom in
Previous page
1/78
Next page
©
2016 DJI. All Rights Reserved.
19
DJI MATRICE 100
User Manual
3. Ensure you have followed the previous steps to install the propellers onto their corresponding
mounting plates securely. To ensure the propellers are properly secured, hold the motor in place
with one hand and use your other hand to rotate the propeller in the unlock direction without
pressing down. If the propeller can be removed this way, the propeller and/or the mounting plate
may have become worn and need to be replaced.
Press down on the propellers rmly, and then rotate it in the unlock direction
to detach it from the
motor.
Mounting the Gimbal (Optional)
The Matrice 100 and N1 Flight Controller is only compatible with the DJI Zenmuse X3, X5
series or XT Gimbal and Camera. Other gimbal systems will require custom conguration.
The following procedures apply to the DJI Zenmuse X3 and XT. For details on mounting the Zenmuse
X5 series, refer to the DJI M100-Zenmuse X5 Series Gimbal Installation Kit Installation Guide.
(http://www.dji.com/product/matrice100/info#downloads)
Mounting the Gimbal Lock and Connecting the Cables
1. Remove the two screws (M3x8 self-tapping) on the Aircraft Status Indicator, and then remove the
indicator gently to avoid damaging the cables.
Aircraft Status Indicator
Handle the indicator
cable gently
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Matrice 100 V1.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Matrice 100 V1.6 in the language / languages: English as an attachment in your email.

The manual is 26,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info