653249
10
Zoom out
Zoom in
Previous page
1/78
Next page
8
©
2016 DJI. All Rights Reserved.
DJI MATRICE 100
User Manual
3. Connect the three motor cables of each motor (M1 - M4) to the ports of its corresponding ESC. Be
sure to match the color of the cables and ports.
4. Connect the LED cable of each frame arm to the port of its corresponding ESC.
6. Ensure the motor cables, LED cable, and antenna cable of each frame arm are correctly installed
to their corresponding ports.
Be sure to match the color of each motor cable with its corresponding port. Wrong connections
can cause the motor to rotate in the wrong direction.
After connecting the antenna cables, tighten the cable tie to prevent the cables from
coming loose.
M2 M1
M1
M2
M3
M4
M4M3
M1 - M4 Mark
LED Cable
Motor Cable
LED Port
Color Mark
Antenna ports on the bottom of
the ight controller
M2 M4 M3 M1
7. Double check the positions of the frame arms.
Frame arms M1 and M2 form the front of the
aircraft, while frame arms M3 and M4 form its
rear. Seen from the top, motors on frame arms
M1 and M3 should rotate counter clockwise,
while motors on frame arms M2 and M4
should rotate clockwise.
Cable Tie
Antenna Cable
Antenna Port
5. Pull the antenna cable of each frame arm through the cable tie on the lower plate of the center
frame, and then connect each cable to its corresponding antenna port on the bottom of the ight
controller (You may require some tools for this step). Note the arrangement of the antenna ports
shown below.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Matrice 100 V1.6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Matrice 100 V1.6 in the language / languages: English as an attachment in your email.

The manual is 26,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info