719093
18
Zoom out
Zoom in
Previous page
1/75
Next page
©
2018 DJI All Rights Reserved.
17
INSPIRE 2
SERIES User Manual
Failsafe RTH
If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH
will be automatically activated if the remote controller signal is lost for more than three seconds.
The aircraft will plan its return route and retrace its original ight route home. The user may cancel
Failsafe RTH to regain control when connection is reestablished.
RTH Procedure
1. Home Point is recorded automatically.
2. RTH procedure is triggered i.e., Smart RTH, Low-Battery RTH, and Failsafe RTH.
3. Home Point is conrmed and the aircraft adjusts its orientation.
4. a. The aircraft will ascend to the pre-set RTH altitude and then y to the Home Point when the
aircraft is further than 20 m from the Home Point.
b. The aircraft will land automatically if RTH is triggered and the aircraft is less than 20 m from the
home point.
5. The aircraft will hover 0.7 m above ground and wait for conrmation from the user. The aircraft
will land and stop its motors after user conrmation.
Use the Failsafe RTH for example:
1. Record Home Point 2. Remote Control Signal Lost
5. Landing (After User Conrmation)
3. Signal Lost for Extended Time
4. RTH (Adjustable Altitude)
Height over HP<=Failsafe Altitude
Height over HP>Failsafe Altitude
Elevate to Failsafe Altitude
Failsafe Altitude
Hovering at 0.7 meters above the Home Point
Aircraft cannot return to the Home Point when GPS signal is weak ( [ ] Less than 4
bars is considered a weak GPS signal) or unavailable.
User cannot control the aircraft while the aircraft is ascending to 65 feet (20 meters) from
the current altitude. However, users can press the RTH button once to exit ascending and
regain control.
The aircraft will automatically descend and land if RTH is triggered when the aircraft ies
within a 65 feet (20 meters) radius of the Home Point. The aircraft will stop ascending and
will return to the Home Point if the aircraft reaches 65 feet (20 meters) in altitude or beyond
during Failsafe.
The aircraft cannot avoid obstacles during Failsafe RTH if the Forward Vision System is
disabled. It is important to set a suitable RTH Altitude before each ight. Launch DJI GO 4,
enter camera and tap to set Failsafe Altitude.
Failsafe Safety Notices
20 m
20 m
H
RTH Altitude
The aircraft cannot avoid obstacles during Failsafe RTH when the
Forward Vision System is disabled. Therefore, it is important to set a
suitable Failsafe altitude before each ight. Launch the DJI GO 4 app,
enter Camera and tap to set the Failsafe Altitude.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Inspire 2 series - 2019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Inspire 2 series - 2019 in the language / languages: English as an attachment in your email.

The manual is 40,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of DJI Inspire 2 series - 2019

DJI Inspire 2 series - 2019 Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info