653252
82
Zoom out
Zoom in
Previous page
1/85
Next page
82
©
2016 DJI. All Rights Reserved.
User Manual
INSPIRE RAW
Updating the Remote Controller Firmware
Ensure the DJI GO app has been updated to v1.2.0 before updating the remote controller. The
System Status bar in Camera View of the DJI GO App will ash several times if a rmware update is
available. Follow these steps to update the rmware via the DJI GO App.
Step 1- Check Battery and SD Card Capacity
1. The remote controller has at least 50% battery level.
2. Your mobile device is able to access the internet.
3. There is at least 30 MB of free space on your mobile device.
Step 2- Download and Update the Firmware
1. Go to the DJI GO App > Camera View > System Status bar > Overall Status. Tap Download the
firmware update package to download and update the firmware. Track the update progress from
progress bar in the DJI GO App. The status LED on the remote controller will blink blue during update
and blink green when update is complete with success.
Firmware update through the DJI GO app will not work with older versions of the remote controller
rmware. If the rmware update fails, follow the instructions below to update the rmware using the
traditional method:
a. Update the latest rmware package les from DJI ofcial web site.
b. Extract all downloaded les into the root directory of an SD card or USB ash drive.
c. Turn off the remote controller, Insert the SD card into a SD card reader or the USB disk onto the
remote controller USB port when remote controller is turned off.
d. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off
the remote controller during the update.
e. It will take approximately 10 minutes to complete the rmware update. The camera will sound
a beeping sound and the Status LED on the remote controller shows solid blue to indicate the
update is in progress. The Status LED on remote controller shows solid green and beeping
sound will stop if the upgrade is completed with success.
f . If you do not have a SD card reader, you may insert the SD card into the gimbal and connect the
gimbal with remote controller to upgrade the remote controller.
You will only be able to update the remote controller rmware through the DJI GO app from
this point onwards.
Updating Intelligent Flight Battery Firmware
The Intelligent Flight Battery is upgraded during the aircraft rmware upgrade process. It is recommended
to keep the upgrade package files in your SD card. The upgrade will start automatically after power
cycling the aircraft.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Inspire 1 RAW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Inspire 1 RAW in the language / languages: English as an attachment in your email.

The manual is 23,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info