677832
11
Zoom out
Zoom in
Previous page
1/28
Next page
DJI Goggles Racing Edition
User Manual
©
2018
DJI All Rights Reserved.
11
2. Power on the DJI OcuSync Air Unit and press the link button on the Air Unit with an appropriate
tool when the linking status indicator is solid green. The indicator will turn solid red when the Air
Unit is waiting for linking.
3. Power on the Goggles RE and swipe down on the touch panel with two fingers to enter the
shortcut menu, then select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Primary” and conrm. This Primary Goggles RE will be linked
with the DJI OcuSync Air System in a few seconds.
4. Press the link button on the Air Unit again. The indicator will turn solid red when the Air Unit is
waiting for linking.
5. Power on the other Goggles RE and swipe downward with two ngers on the touch panel to
enter the shortcut menu, select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Secondary” and conrm. This Secondary Goggles RE will be
linked with the DJI OcuSync Air System in a few seconds.
Goggles RE + Mavic Pro Remote Controller
1. Follow the steps 1 and 2 of “Basic Linking” above to complete the linking of Goggles RE and DJI
OcuSync Air System respectively.
2. Power on the Goggles RE and swipe down on the touch panel with two fingers to enter the
shortcut menu, select “Racing Drone (Digital) > Wireless Settings > Auto”, and set 2.4 GHz as
the operating frequency, since this is the only frequency that the Mavic Pro Remote Controller
supports.
3. Power on the DJI OcuSync Air Unit and press the link button on the Air Unit with an appropriate
tool when the linking status indicator is solid green. The indicator will turn solid red when the Air
Unit is waiting for linking.
4. Put on Goggles RE, select “Racing Drone (Digital) > Linking Settings > Advanced Linking >
Connect two sets of Goggles RE > Primary” and conrm. This Primary Goggles RE will be linked
with the DJI OcuSync Air System in a few seconds.
5. Press the link button on the Air Unit again. The indicator will turn solid red when the Air Unit is
waiting for linking.
6. Connect your mobile device to the Mavic Pro Remote Controller, launch the DJI GO
TM
4 app and
enter the camera view. Press , then select “Remote Controller Linking > Secondary Remote
Controller”. The Remote Controller will be linked with the DJI OcuSync Air System in a few
seconds.
You can only view video transmission on the mobile device linked to the Mavic Pro Remote
Controller. Upstream control signal transmission is not supported.
After familiarizing yourself with digital video transmission, you can connect the trainer port on a
third-party remote controller and the audio port on the Goggles RE with a trainer cable to transmit
the control signal to a racing drone. In addition, the PPM port of the DJI OcuSync Air Unit can be
connected to the gimbal actuator, enabling gimbal control through your head movements.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DJI Goggles Racing Edition V1.4 - 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DJI Goggles Racing Edition V1.4 - 2018 in the language / languages: English as an attachment in your email.

The manual is 5,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info