652861
34
Zoom out
Zoom in
Previous page
1/40
Next page
34
TECHNICAL PROBLEMS
Malfunction
Cause
Solution
The batteries have been
inserted, but no information
is shown on the display.
There might be foreign
particles in the battery
compartment. Ensure that
the batteries are full and
have been inserted with the
correct polarity.
Check whether the battery
contacts fit closely.
If there are any foreign
particles, they must be
removed.
Replace the empty batteries
by full batteries. Observe the
correct polarity.
There is a malfunction of the
electronic system.
Remove the batteries and
re-insert them after approx.
3 seconds.
The display is working, but
the adhesive electrodes do
not transfer any current
pulses.
The plug connections of the
cables have been mounted
incorrectly.
Check the plug connection
on the device and on the
adhesive electrodes for
tightness.
On the device, an intensity
level has been set; however,
only little stimulation is felt
on the adhesive electrodes.
The batteries did not have
sufficient power.
Replace the empty batteries
by full batteries. Observe the
correct polarity.
Impurity of the skin surface.
Clean the skin surface.
The entire adhesive surface
of the electrodes does no
longer have any adhesive
effect and is worn out.
The adhesive electrodes
must be replaced by new
electrodes.
The intensity of the
stimulation current
increases, although a low
intensity level has been set.
The adhesive electrodes
have not been applied
completely on the skin
surface.
Press the adhesive
electrodes firmly to the skin
surface.
The adhesive electrodes
stick only partially to the
skin surface.
The adhesive electrodes are
worn out and must be
replaced by new electrodes.
The device stops while being
used.
The batteries do no longer
provide sufficient power.
Replace the empty batteries
by full batteries. Observe the
correct polarity.
There is a malfunction of the
electronic system.
Remove the batteries and
re-insert them after approx.
3 seconds.
The skin surface shows
changes or is reddened.
The changes to the skin
might have been caused by
the adhesive electrodes.
Immediately stop the
application and consult your
doctor.
20.0 Malfunctions, troubleshooting
GB
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dittmann TEN 250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dittmann TEN 250 in the language / languages: English as an attachment in your email.

The manual is 1,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dittmann TEN 250

Dittmann TEN 250 User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info