749190
13
Zoom out
Zoom in
Previous page
1/32
Next page
13 BOX - IP1529
GB
supplied (see RELEASE INSTRUCTIONS), drill a hole of Ø13
in the up and over door in line with the release pin [B].
3.3 Installingtheleft-handgearmotor
In the event of left-hand side assembly, it is necessary to rotate
the gearmotor 180° so that the release shaft is pointing towards
the centre of the up and over door.
Follow the indications as shown in g.10.
- Disassemble the snap ring, unthread the lever and
disassemble the upper bracket.
- Rotate the gearmotor 180°.
- Thread the lever (also rotated 180°) back on, then fasten
the snap ring back on and reassemble the upper bracket.
3.4 Installingthelimitswitch
It is possible to install the BOXFC1 limit switch as shown in the
gures.
4. ELECTRICAL CONNECTIONS
The BOX30 and BOX40 gearmotors can be connected to the
E1BOX control panel.
Note: if using the E1BOX control panel:
- remove the bottom casing [4],
- x the control panel [10] to the base plate [7].
The gearmotor BOX3SH can be connected to the VIVAH control
panel.
The gearmotor BOX3EH can be connected to the E1HBOX
control panel.
The electrical wiring and the start-up of the gearmotors BOX30,
BOX40 and BOX3SH are shown in g.12 -13 and in the instal-
lation manuals of the control panels E1 and VIVAH.
The electrical wiring and the start-up of the gearmotor BOX3EH
are shown in the installation manual of the control panel
E1HBOX.
5. MAINTENANCEPROGRAM(every6months)
Without 230 V~ power supply and batteries if present:
- Clean and lubricate the moving parts, using neutral grease.
- Check the stability of the automatic system and make sure
that all screws are correctly tightened.
- Check the value of the capacity of the motor condenser.
Reconnect the 230 V~ power supply and batteries if present:
- Check the power adjustment.
- Check that all commands and safety functions (photocells)
are operating correctly.
- Check the batteries are working (continuously) if present,
along with the VIVAH control panel, by removing the power
supply and making a series of operations. Once performed,
turn on the 230 V~ power supply again.
WARNING: For spare parts, see the spares price list.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for DITEC BOX3EH at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of DITEC BOX3EH in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info