316299
14
Zoom out
Zoom in
Previous page
1/27
Next page
14
3 After vacuuming
2.4 Use as a brush vacuum
cleaner
1. Carry out steps 1-4 under Zpage 13, „Use
as a stick vac“ .
2. Switch the electric cleaning brush on by
putting the 2-stage switch into "brush vac-
uuming" position (Fig. 3).
3. To vacuum, push the vacuum cleaner
back and forth. When vacuuming, observe
the corresponding recommendations of
the flooring manufacturer.
2.5 Use as a hand vac
1. Hold the hand vac firmly by its handle and
press the release button (Fig. 4/1) to un-
lock the hand vac.
2. Pull the hand vac forwards out of its brack-
et.
3. Insert the plug into a plug socket.
4. Switch the appliance on by putting the 2-
stage switch (Fig. 1/4) into the centre.
The crevice nozzle (Fig. 1/15) is con-
tained in the bracket as an accessory. Attach
the crevice nozzle as follows:
1. Remove the crevice nozzle from its holder
in the bracket (Fig. 5).
2. Insert the crevice nozzle (Fig. 6/1) into the
suction end of the hand vac (Fig. 6/2).
3 After vacuuming
3.1 Switching off
1. Switch the vacuum cleaner off using the 2-
stage switch (Fig. 1/4).
2. Pull the plug out of the plug socket.
3.2 Transporting
1. If you have used it, stow away the crevice
nozzle by pushing it forcefully back into its
mount. It will click into place audibly.
2. If you have used it, stow away the hand
vac back in its bracket. It clicks audibly in-
to place.
3. If necessary, lower the telescopic stick
(Fig. 2/B) until it clicks into place.
4. Wind the electric cable around the cable
mount (Fig. 1/8).
5. Put the floor nozzle into transport position
by aligning the vacuum cleaner exactly
vertical to the floor. The floor nozzle clicks
noticeably into place.
You can now transport the vacuum cleaner
both by using the handle (Fig. 1/11) and using
the hand vac handle (Fig. 1/3).
3.3 Storage
If you want to store the appliance for a
longer period of time, empty the dust contain-
er and clean it Zpage 15, „Emptying the dust
container“. Keep the appliance in a cool, dry
room.
WARNING:
When you operate the appliance in "brush
vacuuming" mode (Fig. 3), the brushing
roller rotates with a high speed. The brush-
ing roller must not be touched while operat-
ing as otherwise there is a risk of injury.
ATTENTION:
Only operate the appliance if the electrical
voltage stated on the type plate matches the
voltage of your socket. Wrong voltage can
destroy the appliance.
WARNING:
When you leave the work area, switch the
appliance off and pull the electric cable out
of the plug socket by holding the plug. Oth-
erwise, there is a risk of injury.
ATTENTION:
Never position the appliance directly against
heat sources (e. g. heating, oven). Avoid
direct sunlight. Heat can damage the appli-
ance.
M680_Trendino_7lang_20110603.pdf 14 03.06.2011 13:46:38
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil trendino m680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil trendino m680 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info