Manual Dirt Devil M3230 (page 14 of 50) (Dutch, Italian, Turkish, Spanish)

500147

Zoom out

Zoom in

1/50

5 Maintenance

5.1 Emptying the dust container

 It is best to empty the dust container after each vacuuming session.

 Empty the dust container at the latest when the “MAX” mark (Fig. 9/B1)

has been reached, if storing it for a long period, or when sending it.

1. Switch off the appliance, Chapter 4.3, "Switching off".

2. Press the release button for the dust container (Fig. 9/A1) and remove

the dust container from its console.

3. Empty the dust container by holding it low over a dustbin and only then

press the release button (Fig. 9/B).

4. If the dust container and cyclone unit are still dirty after being emptied,

proceed as described in Chapter 5.2, "Cleaning the dust container

and cyclone unit".

5. Otherwise put the bottom on and put the dust container back into its

receptacle. Check that it is securely fitted.

5.2 Cleaning the dust container and cyclone unit

1. Unlock the cyclone unit by turning it in the opposite direction to the dust

container (Fig. 10/A). The arrow on the dust container moves in the

“UNLOCK” direction.

2. Take the cyclone unit up out of the dust container (Fig. 10/B).

3. If necessary, separate the lower part of the cyclone unit from the upper

part by turning the two in opposite directions (Fig. 10/C).

4. Remove any residual dust still clinging to the dust container and

cyclone unit using a dry cloth or a soft brush, e.g. the supplied furniture

brush.

5. If you dismantled the two parts of the cyclone unit, put them back

together. Connect both parts together by turning them towards one

another.

6. Place the cyclone unit on the dust container again. Make sure that the

arrow on the dust container and the fitting mark of the cyclone unit are

opposite one another. Connect both parts by turning them towards one

another. The arrow on the dust container moves in the “LOCK”

direction.

5.3 Cleaning the dual motor protection filter

 It is best to check/clean the dual motor protection filter each time you

clean the dust container and cyclone unit, Chapter 5.2, "Cleaning the

dust container and cyclone unit".

 Clean the dual motor protection filter at the latest when the cleaning

indicator (Fig. 11/A1) lights up.

1. Release the retaining clip on the cover as shown (Fig. 11/B) and open

the cover.

2. Remove the dual motor protection filter (Fig. 11/C).

3. Hold the dual motor protection filter low over a dustbin. Separate the

filter elements from one another (Fig. 12/A). Remove larger

agglomerations of dirt by hand.

4. If the filter elements are still dirty, thoroughly rinse them by hand until

all dirt is gone.

5. If one of the filter elements is damaged, replace it with a new one

(Chapter 5.5, "Spare parts and accessories").

6. Put the completely dry filter elements back together again.

7. Put the dual motor protection filter back onto the cyclone unit (Fig. 12/

B).

8. Put the cover back on. Lock the cover by pushing it firmly onto the

cyclone unit (Fig. 12/C) until the retaining clip clicks into place.

ATTENTION:

Switch off the appliance before emptying the dust container. This will

prevent dust from damaging the appliance.

MAX

NOTE:

You can dispose of the contents of the dust container with your regular

domestic waste as long as it does not contain any substances not

permitted in domestic waste.

NOTE:

If the dust container can no longer be completely cleaned by simply

opening the bottom, the cyclone unit has to be removed.

ABC

ATTENTION:

The filter elements are washable, but may not be cleaned in

dishwashers or washing-machines. Also, do not use detergents or

brushes with hard bristles to clean the filters. Let the filters dry for approx

24 hours at room temperature after cleaning. Only put them back into

the appliance when they are completely dry.

M3230.book Seite 14 Dienstag, 5. Juni 2012 11:53 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M3230 in the language / languages: Dutch, Italian, Turkish, Spanish as an attachment in your email.

The manual is 11,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dirt Devil M3230

Dirt Devil M3230 User Manual - English, German, French - 24 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dirt Devil M3230 Manual

Product: