500142

Dirt Devil M2700 - Centrino SX3 Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
11
2 Operation
GB
2 Operation
2.1 Before use
1. Unpack the appliance and all its accessories.
2. Check the contents for completeness and possible damages. Scope of delivery see Z Fig. 1.
3. Insert the end of the suction hose into the intake opening (Fig. 2) of the cylinder vacuum cleaner until you
hear and feel it locking into place. Make sure that the release catch is on the upper side.
4. Insert the handle into the upper end of the telescopic tube (Fig. 3/A).
5. Attach the floor nozzle to the bottom end of the telescopic tube (Fig. 3/B).
6. Adjust the length of the telescopic tube. Press down the release latch on the tube (Fig. 3/C) to do this. Then
extend the telescopic tube to the desired length. Let go of the release catch while pulling until it locks in
place. You will hear a distinct click.
7. Attach the supplied accessory nozzles to the accessory holder (Fig. 3/C1). If you put the furniture brush
(Fig. 1/4) onto to the crevice nozzle (Fig. 1/3), the twin holders can take 3 accessory nozzles. The
upholstery nozzle (Fig. 1/5) may then be attached to the remaining holder.
2.2 Vacuum cleaning
1. Push the desired nozzle onto the lower end of the telescopic tube or the handle (Fig. 4).
2. If using the floor nozzle, set the "carpet/hard floor" selector according to the type of floor to be cleaned
(Fig. 5):
- "Carpet" position (Fig. 5/A): for deep- and short-pile carpets, runners
- "Hard floor" position (Fig. 5/B): for smooth floors, e.g. laminate, tiles, PVC, etc.
3. Pull out the power cord by the plug up to the yellow mark (Fig. 6/1).
4. Insert the mains plug into a socket with ground/safety contact.
5. Switch on the vacuum cleaner by pushing the on/off switch with integrated power control (Fig. 6/4).
6. Adjust the suction power to suit the floor by turning the on/off switch with integrated power control (Fig. 6/4).
- By turning the control clockwise, suction power is increased, e.g. for removing deep-set dirt particles from
carpets, runners, crevices, etc.
- By turning it counter-clockwise, suction power is reduced, e.g. for cleaning drapes, etc.
ATTENTION:
Always transport or ship the appliance in its original packaging to avoid damage. Keep the packaging for
such an event.
Dispose of no longer needed packaging material properly.
NOTE:
Immediately contact your dealer if you have found damage resulting from transport.
2
BCA
1
3
WARNING:
Danger of injury! A damaged appliance must never be used. Check the cylinder vacuum cleaner and the
power cord each time before using the appliance.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs make sure that you always stand on a higher level
than the appliance.
ATTENTION:
Only use the cylinder vacuum cleaner with all filters intact, in dry condition and correctly fitted. Make sure
that no openings are clogged.
ATTENTION:
Before vacuuming, make sure that the fitted nozzle and the set suction power suit the surface to be cleaned.
Also observe the flooring manufacturer's recommendations. Our (optional) turbo brush serves solely to
vacuum non-sensitive carpets, runners, doormats, and the like. Do not clean any objects with the turbo
brush that you would not clean without a second thought with a conventional brush. Therefore, do not clean
furniture, or materials with a delicate texture, nor any other high-quality or polished substrates with the turbo
brush. Otherwise material damage might occur. If in doubt, refrain from using the turbo brush.
WARNING:
Danger of electric shock! If the red mark (Fig. 6/2) is showing retract the cable back to the yellow mark
(Fig. 6/1) using the carrying-handle with its integrated cable retraction button (Fig. 6/3). Otherwise, the
power cord may be damaged.
NOTE:
With the bypass vent (Fig. 7/1) you can quickly reduce suction power if less power is needed, e.g.to release
curtains accidentally sucked in.
4
5
3
1
2
4
6
1
7
M2700.book Seite 11 Mittwoch, 6. April 2011 2:50 14
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil M2700 - Centrino SX3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M2700 - Centrino SX3 in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info