Manual Dirt Devil M2012 Centrino X3.1 (page 14 of 17) (Turkish, Spanish)

500141

Zoom out

Zoom in

1/17

5 Maintenance

5.1 Emptying and cleaning the dust container

 It is best to empty the dust container after each vacuuming session.

 But empty the dust container at the latest:

- if the cleaning/emptying indicator (Fig. 9/A1) lights up;

- if the "MAX" marking (Fig. 9/B1) has been reached; or

- before prolonged storage or dispatch.

1. Switch off the appliance, ZChapter 4.3, “Switching off”.

2. Push the release button for the dust container (Fig. 9/A2).

3. Remove the dust container from its receptacle.

4. Empty the dust container by holding it low over a dustbin and only then

press the release button (Fig. 9/B2).

5. Also clean the central lamellae filter on this occasion, ZChapter 5.2,

“Cleaning central lamellae filter and motor protection filter”.

6. Remove any residual dust from the dust container using a dry cloth or

a soft brush, e.g. the supplied furniture brush.

7. Close the dust compartment bottom plate.

5.2 Cleaning central lamellae filter and motor protection filter

 Clean the filters each time you clean the dust container, ZChapter 5.1,

“Emptying and cleaning the dust container”.

 Clean the filters at the latest when the cleaning/emptying indicator

(Fig. 9/A1) lights up.

1. Switch off the appliance, ZChapter 4.3, “Switching off”.

2. Remove and empty the dust container, ZChapter 5.1, “Emptying and

cleaning the dust container”.

3. Remove the motor protection filter by pulling it upwards out of its holder

(Fig. 10/A).

4. Release the central lamellae filter by turning in the ‘open’ direction

(Fig. 11) and remove it along with the filter screen from the dust con-

tainer.

5. Hold the central lamellae filter with the filter screen low over a dustbin.

6. Separate the filter screen from the filter by holding the filter firmly and

turning the filter screen in the ‘open’ direction (Fig. 11).

7. Remove larger agglomerations of dirt from both filter elements by hand.

8. Brush out the central lamellae filter using the 2-in-1 combi brush sup-

plied.

9. If the filter elements are still dirty after this dry-brushing procedure, thor-

oughly rinse them by hand until all dirt is gone.

10. If a filter element is damaged or too dirty, replace it with a new one (or-

dering information ZChapter 5.4, “Spare parts and accessories”).

11. Put the new / cleaned and completely dry motor protection filter back

into its receptacle (Fig. 10/B).

12. Fit the filter screen back into the central lamellae filter by holding the fil-

ter firmly and turning the screen firmly in the ‘close’ direction (Fig. 12).

You will feel and hear the elements snap into place.

13. Insert the central lamellae filter back into the dust container and lock the

filter by turning it in the ‘close’ direction (Fig. 12). You will feel and hear

the filter snap into place.

14. Put the dust container back into its receptacle. You will feel and hear it

snap into place.

15. Check that the dust container is fitted securely.

ATTENTION:

Switch off the appliance before emptying the dust container. This will

prevent dust from damaging the appliance.

NOTE:

You can dispose of the contents of the dust container with your regular

domestic waste as long as it does not contain any substances not per-

mitted in domestic waste.

NOTE:

The dust container cannot be cleaned with the central lamellae filter fit-

ted.

ATTENTION:

The filter elements are washable, but may not be cleaned in dishwash-

ers or washing-machines. Also, do not use detergents or brushes with

hard bristles to clean the filters.

1.2.

open

OPEN

1. 2.

ATTENTION:

Let the filter elements dry for approx. 24 hours at room temperature after

wet cleaning. Only put them back into the appliance when they are com-

pletely dry.

Centrino X3.1.book Seite 14 Dienstag, 16. November 2010 4:58 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M2012 Centrino X3.1 in the language / languages: Turkish, Spanish as an attachment in your email.

The manual is 3,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dirt Devil M2012 Centrino X3.1 Manual

Product: