500166
15
Zoom out
Zoom in
Previous page
1/30
Next page
15
4Use
GB
4Use
4.1 Operational safety
4.2 Vacuum cleaning
1. Pull out the cord by the plug up to the yellow mark (Fig. 5/1).
2. Insert the mains plug into a socket with ground/safety contact.
3. Switch on the cylinder vacuum cleaner with the on/off switch (Fig. 5/4).
The cleaning indicator (Fig. 5/5) is illuminated green.
4. If using the floor nozzle, set the "carpet/hard floor" selector according
to the type of floor to be cleaned (Fig. 6):
- Fig. 6/A: for deep- and short-pile carpets, runners
- Fig. 6/B: for smooth floors, e.g. parquet, tiles, PVC, etc.
5. When working with the vacuum cleaner, pull it after you like a sleigh.
4.3 Switching off
1. Switch off the cylinder vacuum cleaner with the on/off switch (Fig. 5/4).
The cleaning indicator (Fig. 5/5) goes out.
2. Pull the plug from the socket and keep it in your hand.
3. To retract the power cord, push the cord retracting button (Fig. 5/3).
4.4 Transport and storage
Only carry the vacuum cleaner by its carrying-handle (Fig. 1/17).
For storage you can park the telescopic tube on the vacuum cleaner by
inserting the parking-hook of the floor nozzle into the parking-bracket
(Fig. 7).
If you want to store the appliance for a longer period of time, empty the
dust container, Chapter 5.1, "Emptying the dust container".
Store the appliance in a cool, dry place, out of the reach of children.
WARNING:
Danger of injury! Check appliance and power cord before each use.
A damaged appliance must never be used.
WARNING:
Danger of injury! Especially when vacuum-cleaning stairs make sure
that you always stand on a higher level than the appliance.
ATTENTION:
Only use the cylinder vacuum cleaner when all filters are intact, dry and
correctly fitted. Make sure that no objects obstruct the telescopic tube,
the suction hose or other openings.
NOTE:
Your vacuum cleaner has an integrated protective function which turns
the appliance off automatically before it can overheat (e.g. due to
blocked suction channels, an over-full dust container, or a dual protec-
tion filter that has not been maintained properly).
If this protective function triggers, the cleaning indicator (Fig. 5/5)
flashes red fast. If this occurs, pull the plug out from the socket and pro-
ceed as described in Chapter 6.1, "Before you send in the appliance".
You can then turn the clean, fully-assembled vacuum cleaner back on. If
the cleaning indicator (Fig. 5/5) flashed red before the cleaning work
was carried out, then it will still flash red slowly for 20–30 seconds (self-
analysis mode) when the appliance is switched back on before changing
to green.
1
2
3
4
5
6
5
B
A
1
6
WARNING:
Danger of electric shock! If the red marking (Fig. 5/2) shows, retract the
cord by pressing the cord retracting button (Fig. 5/3) to pull in the cord
up to the yellow mark (Fig. 5/1) again. Otherwise, the power cord may
be damaged.
NOTE:
In normal situations the bypass vent (Fig. 5/6) must be completely
closed. With the bypass vent you can quickly reduce the suction power,
e.g. to release curtains that have accidentally been sucked in.
WARNING:
When leaving your working-area, switch off the appliance and comply
with the notices in Chapter 4.3, "Switching off". This will help avoid
accidents.
WARNING:
Danger of injury! During uncontrolled retraction the power cord can whip
around, become a tripping hazard or knock over objects. Therefore,
keep the plug in your hand and guide the cord when retracting it.
7
ATTENTION:
Never store the appliance next to heat sources (e.g. stoves or radiators).
Avoid exposing it to direct sunlight. Heat can damage the appliance.
M5080.book Seite 15 Dienstag, 24. April 2012 10:48 10
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil M 5080 - EQU Turbo Silence at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M 5080 - EQU Turbo Silence in the language / languages: English, German, French as an attachment in your email.

The manual is 6,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info