320835
37
Zoom out
Zoom in
Previous page
1/60
Next page
37
5 Troubleshooting
GB
5 Troubleshooting
5.1 Before you send in the appliance
Before sending the appliance to Royal Appliance Customer Services, use the following table to
check whether you can correct the problem yourself.
WARNING:
Danger of injury! Before starting to troubleshoot, switch the appliance off and pull out the mains
plug. Never use a defective appliance.
Problem Possible cause Solution
The vacuum
cleaner stops
suddenly
The overheating protection circuit
has tripped (possibly due to blocked
suction channels, filters, etc.).
Switch the appliance off and pull the plug
out of the socket.
Eliminate the cause of overheating (e. g.
blocked suction channels, filters, etc.).
Wait for about 45 minutes. After the appli-
ance has cooled off, you may switch it on
again.
The cleaning
results are
unsatisfactory
The dust container is full. Empty/clean the dust container.
The bypass vent (Fig. 1/3) is open. Close the bypass vent (Fig. 1/3).
The brush/nozzle you have chosen
does not suit the flooring.
Select the right brush/nozzle for the type of
floor you want to clean, Zchapter 2.3, "Us-
ing other nozzles (accessories)".
The position of the "carpet/hard floor"
selector is not suitable for the floor.
Set the "carpet/hard floor" selector to the
correct position for the type of floor,
Zchapter 3.2, "Vacuum cleaning", step4
you want to clean.
The filter is dirty. Clean the respective filter Zchapter 4.4,
"Cleaning the motor protection filter" or
Zchapter 4.5, "Cleaning the hygienic ex-
haust filter".
Nozzle, telescopic tube or suction
hose are blocked.
Remove the obstacle. If necessary, use a
long wooden stick (e. g. a broomstick) to do
this.
The dust con-
tainer will not
snap back in-
to place
The motor protection filter is not fitted
correctly.
Refit the filter cover of the motor protection
filter as shown under Zchapter 4.4, "Clean-
ing the motor protection filter" (Fig. 30) so
that the edges of the filter cover and the fil-
ter bracket are exactly flush. Only press
down the latch of the filter cover after the
preceding step has been executed.
NOTE:
If you were unable to solve the problem with the information in the above table, contact Customer
Service (Zpage 132, "International Service").
02_Infinity V12_gb.book Seite 37 Freitag, 22. Juli 2011 12:10 12
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil m 5010 7 infinity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil m 5010 7 infinity in the language / languages: English, German, Dutch, French, Italian, Turkish, Spanish as an attachment in your email.

The manual is 1,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info