500164

Dirt Devil M 2725 Popster Manual

14
Zoom out
Zoom in
Previous page
1/24
Next page
14
5 Maintenance
5 Maintenance
5.1 Emptying and cleaning the dust container
It is best to empty the dust container after each vacuuming session.
But empty the dust container at the latest:
- if the cleaning/emptying indicator (Fig. 9/A1) lights up;
- if the "MAX" marking (Fig. 9/B1) has been reached; or
- before prolonged storage or dispatch.
1. Switch off the appliance, ZChapter 4.3, “Switching off”.
2. Push the release button for the dust container (Fig. 9/A2).
3. Remove the dust container from its receptacle.
4. Empty the dust container by holding it low over a dustbin and only then
press the release button (Fig. 9/B2).
5. Also clean the central lamellae filter on this occasion, ZChapter 5.2,
“Cleaning central lamellae filter and motor protection filter”.
6. Remove any residual dust from the dust container using a dry cloth or
a soft brush, e.g. the supplied furniture brush.
7. Close the dust compartment bottom plate.
5.2 Cleaning central lamellae filter and motor protection filter
Clean the filters each time you clean the dust container, ZChapter 5.1,
“Emptying and cleaning the dust container”.
Clean the filters at the latest when the cleaning/emptying indicator
(Fig. 9/A1) lights up.
1. Switch off the appliance, ZChapter 4.3, “Switching off”.
2. Remove and empty the dust container, ZChapter 5.1, “Emptying and
cleaning the dust container”.
3. Remove the motor protection filter by pulling it upwards out of its holder
(Fig. 10/A).
4. Release the central lamellae filter by turning in the ‘open’ direction
(Fig. 11) and remove it along with the filter fleece from the dust
container.
5. Hold the central lamellae filter with the filter fleece low over a dustbin.
6. Separate the filter fleece from the filter by holding the filter firmly and
pulling the filter fleece carefully off (Fig. 12).
7. Remove larger agglomerations of dirt from both filter elements by hand.
8. Brush out the central lamellae filter using the 2-in-1 combi brush sup-
plied.
9. If the filter elements are still dirty after this dry-brushing procedure, thor-
oughly rinse them by hand until all dirt is gone.
10. If a filter element is damaged or too dirty, replace it with a new one (or-
dering information ZChapter 5.4, “Spare parts and accessories”).
11. Put the new / cleaned and completely dry motor protection filter back
into its receptacle (Fig. 10/B).
12. Pull the filter fleece back over the central lamellae filter so that the
lamellae are completely enclosed.
13. Insert the central lamellae filter back into the dust container and lock the
filter by turning it in the ‘close’ direction. You will feel and hear the filter
snap into place.
14. Put the dust container back into its receptacle. You will feel and hear it
snap into place.
15. Check that the dust container is fitted securely.
ATTENTION:
Switch off the appliance before emptying the dust container. This will
prevent dust from damaging the appliance.
NOTE:
You can dispose of the contents of the dust container with your regular
domestic waste as long as it does not contain any substances not per-
mitted in domestic waste.
A
1
B
1
2
2
9
NOTE:
The dust container cannot be cleaned with the central lamellae filter fit-
ted.
ATTENTION:
The filter elements are washable, but may not be cleaned in dishwash-
ers or washing-machines. Also, do not use detergents or brushes with
hard bristles to clean the filters.
AB
10
OPEN
11
12
ATTENTION:
Let the filter elements dry for approx. 24 hours at room temperature after
wet cleaning. Only put them back into the appliance when they are com-
pletely dry.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil M 2725 Popster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil M 2725 Popster in the language / languages: English, German, French as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info