321064

Dirt Devil m 2613 8 centrixx ts Manual

40
Zoom out
Zoom in
Previous page
1/61
Next page
40
Troubleshooting
5 Troubleshooting
5.1 Before you send in the appliance
Before sending the appliance to Royal Appliance Customer Services, use the following table to
check whether you can solve the problem yourself.
WARNING:
Danger of injury! Never use a defective appliance! Always switch off the appliance and disconnect
it from the mains before starting troubleshooting ZChapter 3.2, "Switching off and retracting the
power cord.".
Problem Possible cause Solution
The appliance will
not start
Plug is not plugged in or the
appliance is not switched on.
Insert the plug into a mains socket and
switch on the appliance, ZChapter 3.1,
"Vacuum cleaning".
The socket does not carry
current.
Test the cylinder vacuum cleaner at another
socket which you are sure carries current.
Power cord is damaged. Have the cord replaced by Royal
Appliance
Customer Services, address, ZPage 41,
"Warranty".
The vacuum
cleaner stops
suddenly.
The overheating protection has
tripped (possibly due to blocked
suction channels, filters, or
similar).
Switch the appliance off and pull the plug out
of the socket.
Eliminate the cause of overheating (e.g.
blocked suction channels, filters, etc.). Wait
for about 45 minutes. After it has cooled off,
you may switch on the vacuum cleaner
again.
The results are
unsatisfactory in
spite of the
appliance working
correctly.
The dust container is full. Empty / clean the dust container ZChapter
3.4, "Emptying the dust container".
The filter is dirty. Clean the respective filter, ZChapter 4,
"Cleaning and care".
Nozzle, telescopic tube or suction
hose are blocked.
Remove the obstacle. If necessary, use a
long wooden rod for this (e.g. a broomstick).
The nozzle you are using does
not suit the flooring.
Change the nozzle ZChapter 2.3, "Using
further nozzles (accessories)"
The "carpet / hard floor" switch
(Fig. 1/13) is in the wrong position
for the particular type of floor.
Set the "carpet/hard floor" switch (Fig. 1/13)
to the correct position for the type of floor,
ZChapter 3.1, "Vacuum cleaning", step 4.
The appliance's
noise is unusually
loud.
Sucked-in objects are obstructing
the air stream.
Remove the objects. If necessary, use a
long wooden rod for this (e.g. a broomstick).
The dust container is full. Empty / clean the dust container ZChapter
3.4, "Emptying the dust container".
02_Centrixx TS_gb.book Seite 40 Donnerstag, 2. April 2009 12:38 12
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil m 2613 8 centrixx ts at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil m 2613 8 centrixx ts in the language / languages: English, German, Dutch, French, Turkish, Spanish as an attachment in your email.

The manual is 4,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info