665126
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
2 Assembly and preparation
2 Assembly and preparation
2.1 Mounting handle
1. Use a screwdriver to unscrew the pre-installed Phillips-head screw
from the handle (Fig. 1).
2. Put the handle into the handle holder (Fig. 2). Ensure that both holes
are aligned (Fig. 3).
3. Put the Phillips screw you took out before into its hole and tighten by
hand (Fig. 4).
4. Now attach the pad, ZChapter 2.2, ‘Attaching the cloth and pad’.
2.2 Attaching the cloth and pad
1. Put a clean micro-fibre cloth onto the floor so that the bumps of the cloth
are pointing down and the flat surface is facing up.
2. Put the pad onto the cloth as shown (Fig. 5).
- The cloth has exactly the same outline as the pad.
- The attachment mechanism of the pad holds the cloth securely.
3. Now put the back of the appliance foot onto the pad as shown (Fig. 6).
You will hear a click as soon as the pad has engaged with the foot
(Fig. 7).
4. Lift the appliance slightly to check that the pad is connected to the ap-
pliance securely.
2.3 Filling the water tank
1. Put the appliance into the neutral position by straightening the handle
until it is at about 90° to the base of the appliance (Fig. 21), you can feel
it lock into place, and the appliance remains standing without support.
2. Release the water tank as shown (Fig. 9) and take it out of its holder.
3. Unscrew the tank cap counter-clockwise and take it off the water tank
(Fig. 10).
4. Fill the water tank with clear, cold tap water no higher than just under
the filling nozzle (Fig. 11).
5. Turn the tank cap clockwise until it is completely back on the water tank
(Fig. 10).
6. Put the water tank back into its holder firmly (Fig. 12).
You will feel and hear it snap into place.
1 2
3
4
click!click!
5
6
7
8
CAUTION:
If you want to steam clean hard floors, the pad and micro-fibre cloth
have to be mounted. Ensure that a micro-fibre cloth is always attached
when the pad is mounted. If you use the pad without a micro-fibre cloth,
the floor or pad might be damaged.
NOTE:
To release the pad, you have to press the foot button marked ‘CLEAN-
ING PAD RELEASE’ (Fig. 8).
Release the pad e.g.:
- after every steam clean or
- if you just want to sweep with the brush.
click!click!
9
10 11 12
WARNING:
Danger of injury! Do not add disinfectant or any other additives such as
cleaning agents, alcohol, perfumes or chemicals into the water tank.
These make use of the appliance unsafe.
M366.book Seite 10 Mittwoch, 7. November 2012 9:26 09
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil Express M366 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil Express M366 in the language / languages: English, German, Dutch, French, Italian, Spanish, Spanish as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info