714581

Dirt Devil DD777-1 Blade Manual

19
Zoom out
Zoom in
Previous page
1/180
Next page
Maintaining the appliance
Emptying the dust collector
1
Press the wand release button (Fig
7
/
1
) and
remove the reach wand or the accessory from the
handheld.
2
Hold the handheld over a bin and press
the dirt release button (Fig.
11
/
1
). The dust col-
lector cover opens and the dust falls out.
Cleaning the lters
CAUTION!
Use the appliance only with both lters in place.
NOTE:
For best cleaning results, tap the lters over a bin
every 4 – 6 uses and wash them every 3 months.
1
Empty the dust collector, > “Emptying the dust
collector” on page 19.
2
Twist the lter cover anti-
clockwise to unlock (Fig.
12
) and remove the lter
cover from the handheld.
3
Pull the tab on the l-
ter (Fig.
13
/
1
) to remove it from the cover.
4
Pull
the round foam lter to remove it from the handheld.
5
Tap both lters over a bin to remove dirt.
6
Rinse
out the lters under running water (max. 40 °C).
7
Leave the lters dry for at least 24 hours before
putting them back in the appliance.
Cleaning the separator
1
Empty the dust collector, > “Emptying the dust
collector” on page 19.
2
Twist the lter cover anti-
clockwise to unlock (Fig.
12
) and remove lter cover
from the handheld.
3
Press dust collector release
button to open the dust collector.
4
To release the
separator, push from inside the dust collector and
pull out the separator to remove (Fig.
14
).
5
Pull l-
ter out of the separator (Fig.
15
).
6
Tap lter and
sepa- rator over a bin to remove dirt.
7
Rinse out the
lter under running water (max. 40 °C).
8
Let the l-
ter dry for at least 24 hours before putting it back in
the appliance.
Removing blockages

Carefully remove any hair from the turbo head
with a pair of scissors in order to remove any
blockages.

Use a broomstick or similar blunt object to remove
blockages from the reach wand.
Removing and replacing the brushbar
1
Press accessory release button and remove the
turbo head from the reach wand or the handheld
(Fig.
16
/
1
).
2
Find the letter “A” on the base of the
turbo head to indicate the cover you need to remove
(Fig.
17
/
A
).
3
Use a screwdriver to unscrew the
three screws and remove the cover.
4
Slide the brushbar out of the housing (Fig.
18
).
5
Clear any blockages or replace the brushbar if it
is defective.
6
Push brushbar onto the cover, slide
both parts in the housing (Fig.
19
) and tighten the
cover with the screws.
Removing and replacing the belt
1
Press the accessory release button and remove
the turbo head from the reach wand or the hand-
held (Fig.
16
/
1
).
2
Find the letter “B” on the base of
the turbo head to indicate the cover you need to re-
move (Fig.
17
/
B
).
3
Use a screwdriver to unscrew
the three screws and remove the cover.
4
If the belt
is broken, remove it and slide a new one onto the
cogs (Fig.
20
).
5
Ret the cover and tighten it with
the screws.
Accessories
• Crevice tool – 0777007 (Fig.
21
/A)
• Brushbar – 0777017 (Fig.
21
/B)
• Pre-motor lter – 0777001 (Fig.
21
/C)
• Wall mount – 0777006 (Fig.
21
/D)
• Filter set (separator + lter) – 0777002 (Fig.
21
/E)
• 24 V mains adapter – 0767004 (Fig.
21
/F)
• 32 V mains adapter – 0777004 (Fig.
21
/F)
• Pet tool – 0777009 (Fig.
21
/G)
• Dusting brush – 0777008 (Fig.
21
/H)
• Parquet tool – 0777011 (Fig.
21
/I)
Troubleshooting
Before you contact our Dirt Devil customer service
department or send the appliance to the Dirt Devil
customer service department, you will nd a lot of
additional information in the service area of our web-
site which will help you solve problems.
www.dirtdevil.de/service
WARNING!
Switch o the appliance before you start trouble-
shooting. Never use a faulty appliance, mains
adapter or rechargeable battery.
!
EN
19
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dirt Devil DD777-1 Blade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dirt Devil DD777-1 Blade in the language / languages: All languages as an attachment in your email.

The manual is 4,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info