Manual Directed Electronics Viper 5701 (page 40 of 56) (English)

583784

Zoom out

Zoom in

1/56

Diagnostics

The microprocessor at the heart of your system is constantly monitor-

ing all of the switches and sensors connected to it. It is designed to

detect any faulty switches and sensors and prevent them from dis-

abling the entire system. The microprocessor will also record and report

any triggers that occurred during your absence.

Refer to System Status Chirps and Table of Zones sections of this guide

for diagnostic information.

Arming

If the security system is armed at the same time that an input is ac-

tive (such as a door opening or sensor triggering), you will hear one

siren chirp to indicate arming and a second siren chirp to indicate

Bypass Notification.

A Bypass Notification chirp means that the security system ignores

the input that was active when the system was armed, until that input

ceases. Three seconds after that input ceases, the security system will

resume normal monitoring.

For example, if your vehicle has an interior light exit delay and you

arm your security system before the interior light turns off, you may

hear a second Bypass Notification chirp.

Once the light turns off, however, the security system resumes normal

monitoring.

Note: Bypass Notification does not occur when the system is in

Silent Mode or if the notification chirps have been programmed

off by the installer.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics Viper 5701 in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics Viper 5701 Manual

Product: