Manual Directed Electronics Viper 5701 (page 20 of 56) (English)

583784

Zoom out

Zoom in

1/56

adjust mode:

Press/hold the button of the remote control for 8 seconds or

until the Amber LED turns on and you hear one long beep.

Press/hold the button 1.5 seconds or until the amber led flashes

once:

The control module will emit one long chirp, enter adjust mode, and

send the current level of information back to the transmitter. The

remote will beep once and the button LEDs will turn on to indicate the

current level.

Press the Arm, Disarm, or Remote Start buttons to adjust the sensor

level.

Arm button: Pressing the button will increase the sensitivity one

level. The siren chirps twice, the remote beeps twice and the LEDs

increase in level.

Disarm button: Pressing the

A U

button will decrease the sensitivity

one level. The siren chirps once, the remote beeps once and the LEDs

decrease in level.

Remote Start button: Pressing the button will reset to default

level 7. The siren chirp three times, the remote beeps three times and

the LEDs reset.

To exit the adjust shock sensor mode from the remote control:

Press the button. The control module is exited.

To exit the adjust shock sensor mode from the control module:

Open an entry point or turn on the ignition, the control module will

emit one long chirp and tell the remote to exit adjust mode.

To exit programming:

▀

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics Viper 5701 in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics Viper 5701 Manual

Product: