Manual Directed Electronics Cyber 125xv (page 23 of 38) (English)

583786

Zoom out

Zoom in

1/38

2004 Directed Electronics, Inc.

You can prevent your system from automatically activating the

Failsafe

Starter Kill and locking the doors by using Valet

Mode.

This is very useful when washing the vehicle or having it serviced.

In Valet

Mode, the starter kill cannot be activated, even with the

transmitter, but all convenience functions (door locks, remote

start, etc.) will continue to work normally.

To enter or exit Valet

Mode:

1. Turn the ignition on.

2. Turn the ignition off.

3. Press and release the Valet

switch within 10 seconds.

The status LED will light steadily if you are entering Valet

Mode

and will turn off if you are exiting Valet

Mode.

If you are threatened in or near your vehicle, you can attract

attention by triggering the system with your transmitter. Just

press for 1.5 seconds to enter Panic Mode. In Panic Mode, the

horn will honk and the parking lights will flash for 30 seconds. To

stop Panic Mode at any time, press , or on the

transmitter.

NOTE: In order for Panic Mode to be effective, the vehicle’s horn (or

optional siren) as well as the vehicle's parking lights must be

connected.

Panic Mode

DRW-35

Valet

Mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics Cyber 125xv in the language / languages: English as an attachment in your email.

The manual is 1,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics Cyber 125xv Manual

Product: