Manual Directed Electronics Clifford 320.3X (page 29 of 41) (English)

583779

Zoom out

Zoom in

1/41

Out of Range

Each time a command is performed the Responder LE will expect a

command conﬁrmation from the system. If a command conﬁrmation

is not received the

and transmit LED’s ﬂash and a long fault tone

plays as an alert.

No Remote Output

Occasionally when a command is performed the remote may not

generate a command conﬁrmation output or out of range output. This

indicates that the system received the command but it was an incom-

plete command (e.g. aux button pressed too short to activate the trunk

release) or it was an illegal message (e.g. the command was cor-

rupted due to local RF interference). These are temporary normal func-

tions of the system and remote, perform the command again within 10

seconds to return to normal operation.

Car Select

Car 2 must ﬁrst be turned on (See Remote Control Conﬁguration sec-

tion to turn on).

Press1. and hold the

button for 3 seconds. The remote ﬂashes

the transmit LED and beeps once or twice to indicate the selected

car is 1 or 2.

Release2. the button for car select or continue to hold for program-

ming.

Release3. the

button, then press and release while the transmit

LED and beeps continue to perform car select. Once the car is

selected a command can be performed by pressing one of the

command buttons.

Note: The 1-way remote does not emit any indication beeps. The

transmit LED ﬂashes once or twice to indicate car one or car two.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics Clifford 320.3X in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics Clifford 320.3X Manual

Product: