Manual Directed Electronics Avtal 3001L (page 21 of 24) (English)

583952

Zoom out

Zoom in

1/24

QUICK REFERENCE GUIDE

To arm the system

■ You can arm the system by locking the doors with your factory keyless

entry transmitter. When the system arms, you will hear a short siren

chirp, and see the parking lights flash once.

To disarm the system

■ To disarm the system, unlock the doors using your factory keyless trans-

mitter. You will hear two siren chirps, and the parking lights will flash

twice. If the siren chirps more than twice when disarming, your system

may have triggered while you were away. See Table of Zones information

on back.

Disarming without a transmitter

■ Turn on the ignition. Press and Release the Valet switch the pro-

grammed number of times within 10 seconds. Default is 1. Possible set-

tings are from 1 to 5. The system should now disarm. If it does not, you

may have waited too long. Turn the ignition off and on and try again.

To enter or exit Valet Mode

■ Turn ignition to “run” position, then turn to “off” position. Press and

Release the Valet switch within 10 seconds. The status LED will light

solid if you are entering Valet Mode, and it will go out if you are exit-

ing Valet Mode.

Note: System must be disarmed to enter Valet mode.

Remote Valet

■ Open any door. Press the lock button on your transmitter. Within one

second, Press the unlock button on your transmitter. Within one sec-

ond, Press the lock button on your transmitter again. The status LED

will stay on if you have entered Valet Mode, and it will go out when exit-

ing Valet Mode.

Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.

✂✂

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics Avtal 3001L in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics Avtal 3001L Manual

Product: