Manual Directed Electronics 732T (page 24 of 25) (English)

583908

Zoom out

Zoom in

1/25

Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.

✂✂

QUICK REFERENCE GUIDE:

Arming

■ Press for one second. When the system arms, you will hear a short

chirp, and see the parking lights flash once. If the vehicle’s power door

locks are controlled by the system, the doors will lock.

Arming while driving

■ Press while the vehicle is running. The system will chirp once and

then once more to indicate that the ignition is on.

Disarming

■ Press . You will hear two chirps, and the parking lights will flash

twice. If power locks are controlled by the system, the doors will unlock.

Disarming without a transmitter

■ Turn on the ignition. Push the Valet switch within 15 seconds. The sys-

tem should now disarm. If it does not, you may have waited too long, so

turn the ignition off and on and try again.

Silent Mode

™

■ Press briefly before arming or disarming, and the confirmation chirp(s)

will be eliminated for that one operation only.

Panic Mode

■ Press for 1.5 seconds, and you will enter Panic Mode. The siren will

sound and the parking lights will flash for 30 seconds.

To enter or exit Valet Mode with the Valet switch

■ Turn ignition to "run" position, then turn to "off" position. Press and

release the Valet switch within 10 seconds. The Status LED will light

steady if you have entered Valet Mode, and it will go out if you exited

Valet Mode.

Using Remote Valet as you enter or exit the vehicle:

■ Open any door. Press . Press . Press again. The Status LED will

light steady if you have entered Valet Mode, and it will go out if you exit-

ed Valet Mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 732T in the language / languages: English as an attachment in your email.

The manual is 1,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 732T Manual

Product: