Manual Directed Electronics 5200XS (page 31 of 38) (English)

583904

Zoom out

Zoom in

1/38

If the system has entered the triggered sequence (siren has begun

chirping), pressing the disarm button of the transmitter will not

disarm VRS

. To disarm the VRS

during a VRS

trigger

sequence:

1. Turn the ignition on.

2. Press the Valet switch the pre-

programmed number of times to

disarm the VRS system.

gglloossssaarryy ooff tteerrmmss

Control Unit:

The "brain" of your system. Usually hidden under

the dash area of the vehicle. It houses the microprocessor which

monitors your vehicle and controls all of the system's

functions.

Fail Safe Starter Kill

: An automatic switch controlled by the secu-

rity system which prevents the vehicle’s starter from cranking

whenever the system is armed. The vehicle is never prevented

from cranking when the system is disarmed, in Valet mode, or

should the starter interrupt switch itself fail. Your system is ready

for this feature, however installation may require additional

labor.

note: If the VRS® system has begun its chirping

sequence, the ignition must be turned off, then on to dis-

arm. If you are driving the vehicle at the time, pull to a

safe place away from traffic and follow the triggered

sequence disarm procedure.

DRW-35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 5200XS in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 5200XS Manual

Product: