Manual Directed Electronics 5200XS (page 21 of 38) (English)

583904

Zoom out

Zoom in

1/38

ccooddee hhooppppiinngg

The receiver and transmitters each use mathematical formulas

called algorithms to change their codes each time the transmitter

is used. This technology has been developed to increase the secu-

rity of the unit. The control unit knows what the next codes

should be. This helps to keep the transmitter "in sync" with the

control unit even if you use the remote control out of range of

the vehicle. However, if the transmitter has been pressed many

times out of range of the vehicle, or if the battery has been

removed, it may get out of sync with the control unit and fail to

operate the system. To re-sync the remote control simply press

of the transmitter several times within range of the vehicle.

The alarm will automatically re-sync and respond to the trans-

mitters normally.

note: Your system stores the last two triggered zones in

memory. If your system has been triggered but the LED

has been reset by turning on the ignition, your dealer can

still recall the last two zones that were triggered. Contact

your dealer for details.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 5200XS in the language / languages: English as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 5200XS Manual

Product: