Manual Directed Electronics 250 (page 11 of 22) (English)

583776

Zoom out

Zoom in

1/22

2001 Directed Electronics, Inc.

To disarm the security system,

turn the ignition key on and

press and release the Valet

switch within 15 seconds. The

system should now disarm. If the system does not disarm, you may

have waited too long to press the Valet switch; turn the ignition

off and repeat the process.

If you are threatened in or near your vehicle, you can press and

hold for 1.5 seconds to trigger Panic Mode on your security

system and attract attention. The siren will sound and the parking

lights will flash for 30 seconds. To stop the Panic Mode at any

time, press again.

Use Silent Mode to temporarily turn off the arm or disarm chirps by

briefly pressing before either arming or disarming. The confir-

mation chirp(s) will then be eliminated for that one operation

only. To permanently turn off the arm and disarm chirps, contact

your installation dealer.

NOTE: The Warn Away Response to lighter impacts is bypassed if the

system is armed using the Silent Mode. This ensures that the siren does

not chirp in an environment where you do not want chirps to be emitted.

The system is still capable of being triggered by heavier impacts; only the

Warn Away Response generated by light impacts is bypassed.

Silent Mode

Panic Mode

DRW-35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 250 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 250 Manual

Product: