Manual Directed Electronics 1601 (page 26 of 52) (English)

583790

Zoom out

Zoom in

1/52

➤ Manual transmission vehicles

If the vehicle has manual transmission the proper steps must be fol-

lowed before leaving the parked vehicle or the remote start feature is

disabled.

Put the transmission in neutral.1.

Press on the vehicle’s foot brake.2.

Apply the emergency brake.3.

Release the vehicle’s foot brake. 4.

Note:

Pressing the brake again

after this step will disable the remote start feature.

Within 15 seconds activate the remote start from the remote.5.

The parking lights will ﬂash 5 times conﬁrming that the remote start 6.

is active.

Turn off the ignition (the car should stay running when key is turned 7.

off).

Exit the vehicle and close the door.8.

Arm the alarm (the vehicle should shut off when arming the sys-9.

tem).

You can now remote start the vehicle. If a door is opened or if the alarm

is triggered before the next remote start activation the system will not

remote start.

To drive your vehicle after it has been remote started:

Get in without stepping on the brake. 1.

Insert the ignition key and turn it to the ON position.2.

Now, step on the brake.3.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 1601 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 1601 Manual

Product: