Manual Directed Electronics 1601 (page 22 of 52) (English)

583790

Zoom out

Zoom in

1/52

High-Security Disarming

If you want the Full Alarm response to stop without unlocking the doors,

press the

A U X

button. The system will re-arm and the current alarm re-

sponse will reset.

➤ System override

To disarm the system without a remote control:

You will need to use your Override Switch located

on your systems control center (see diagram to left)

to disarm the system. The Override Switch disarms

the system only if you have the vehicle key.

Open the door. The alarm will sound.•

Immediately insert the key into the ignition and turn it to the RUN or ON

position. (all the indicators in the dash will turn on).

Press the Override Switch once.

Note: The Override Switch feature allows you to select a speciﬁc

number of presses needed to disarm the alarm. If the Override

Switch has been programmed to a new number of presses by your

authorized dealer, that number should be indicated below.

Override Switch Number ___________

➤ Valet mode

To enter or exit valet mode with the valet/program switch:

Turn the ignition key on and then off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Directed Electronics 1601 in the language / languages: English as an attachment in your email.

The manual is 5,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Directed Electronics 1601 Manual

Product: