798195

Dimplex XLE050 Manual

13
Zoom out
Zoom in
Previous page
1/110
Next page
9. Remove the inner front and insulation to gain access to the core of the heater.
Lay the inner front carefully to one side to ensure it is not damaged. (Fig. 9)
10. Remove the cardboard element support and dispose of. (Fig. 10)
Energy Cells
The energy cells are supplied separately to the heater in packs of three.
The reference number is 047243.
Energy Cells should be handled with care due to the weight and risk of
hand/foot injury.
11. The energy cells have several grooves on one surface for locating around
the elements. The two slots through the centre of the energy cell create the
air passages within the core.
Position the first energy cell of the bottom row to the right, firmly pressed against the
side insulation with the element grooves facing upwards and fitting neatly around the
element. Angle the element upward to fit the energy cell.
Position the second energy cell in the row against the left-hand insulation. Place the
remaining energy cells between the first and second in the row. (Fig. 11)
DO NOT DISCONNECT THE ELEMENT TERMINALS
In addition ensure the slots for the air passages line up with the holes in the
base insulation.
Fit the remaining energy cells to the bottom row, being careful not to damage or
dislodge the element.
Note - The bends in the element locate around the grooves in the energy cell to
secure the element.
12. Position the second row of energy cells on top of the first but this time the energy
cells must be upside down ensuring the grooves are positioned over the elements.
(Fig. 12)
Building the Heater Core
NOTE:
The element tails must extend no
further than 30mm into the right
hand chamber.
30mm ±1mm
13
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex XLE050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex XLE050 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info