4.2 Cold water flow rate at an interal pressure differential of2
W10 / W35m³/h / Pa
2.The given well water flow rate is identical for all operating points.
21.2 / 21700
4.3Heat output / COP3
3.These data indicate the size and capacity of the system according to EN 255 and EN 14511 (5K at W10). For an analysis of the economic and energy efficiency of the system,
both the bivalence point and the regulation should be taken into consideration. These specifications can only be achieved with clean heat exchangers. Information on mainte-
nance, start-up and operation can be found in the respective sections of the installation and operating instructions. The specified values, e.g. W10 / W55, have the following
meaning: Heat source temperature 10 °C and heating water flow temperature 55 °C..
10K5K410K5K4
4.The temperature spread of 5K is based on the standard value of W10 / W35 in operation with 2 compressors.
4.5Sound pressure level at a distance of 1m 7dB(A)
7.The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35°C. The specified sound pressure level
represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
4456
5Dimensions; weight and filling quantities
5.1Device dimensions without connections8H x Wx L mm
8.Please note that additional space is required for pipe connections, operation and maintenance.
1660 x 1000 x 7751890 x 1350 x 775
5.2Device connections for heating9Inches
9.Double nipples matching the connection sized are included in the scope of supply
R 1 1/2“ Int./Ext.ThreadR 2“ Int./Ext.Thread
5.3Device connections for heat source9InchesR 2“ Int./Ext.ThreadR 2 1/2“ Int./Ext.Thread
5.4Weight of the transportable unit(s) incl. packagingkg373593
5.5Refrigerant; total filling weight0Type / kgR404A / 7,5R404A / 15,8
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Dimplex WI 100TU at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Dimplex WI 100TU in the language / languages: English, German, French as an attachment in your email.
The manual is 2.63 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
