520489
12
Zoom out
Zoom in
Previous page
1/20
Next page
12
Manual Charging (Manual Operation)
If the charging of the device is to be controlled manually, the
charging knob must be placed on the axis of the adjuster.
Remove the cap at the front panel of the storage heater.
The thermal energy to be stored can be set via the knob.
On extremely cold days choose setting III (right-hand stop),
with higher external temperatures choose a lower setting.
No charging takes place at the left-hand stop.
Room Temperature Control
The transfer of the thermal energy stored in the storage
heater is automatically controlled via the room temperature
controller. The desired temperature, e.g. 2 C is set on a
scale. Room temperature controllers can be either wall-
mounted or integrated into the storage heater.
During the night or when a room is not used, the temperature
should be lowered by roughly C.
A further lowering of the temperature is not recommended,
as this causes excessive cooling of the room's walls. In case
of changes of the temperature settings, it will take a while for
the room temperature to be reached. Therefore, the
temperature lowering must be cancelled some time (at least
one hour) before the room is to be used again. With many
controllers this can be carried out automatically with a
setback thermostat.
During longer absences frost protection must be taken into
consideration.
Maintenance
Occasional vacuum-cleaning in the area of the air outlet grid
and the lower slot rows of the right side panel is
recommended.
As part of the maintenance cycle, it is recommended to test
the correct functioning of the controlling and regulating
devices. This test must be carried out every 10 years at the
latest to prevent unnecessary energy consumption.
Temperature Management
Room Too Cold
Check the breaker/fuses for the storage heaters in the
supply panel and, if necessary, replace or reactivate the
breaker/fuses.
Charging adjuster at the storage heater set too low
(manual charging only). Correct setting.
Incorrect room thermostat setting. Correct setting.
The windows and doors are open and/or the neighbouring
rooms are not heated.
Incorrect setting of the central charge control.
Correction according to the operating instructions of the
charge control.
Room Too Hot
Check the breaker/fuse for the charge control in the
supply panel and, if necessary, replace or reactivate the
breaker/fuse.
Charging adjuster at the storage heater set too high
(manual charging only). Correct setting.
Incorrect room thermostat setting. Correct setting.
Incorrect central charge control setting:
Correction according to the operating instructions of the
charge control.
If you cannot correct the fault, please contact an electrician
or your nearest after-sales service provider.
To process your order, we require the model number (E-No.)
and the data code (FD). This information is listed on the
rating plate.
Rating plate
Maximum charging No charging
Operating Instructions for Users English
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex VFMi 30C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex VFMi 30C in the language / languages: English, German as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Dimplex VFMi 30C

Dimplex VFMi 30C Usermanual and installation guide - Dutch, French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info