798171
36
Zoom out
Zoom in
Previous page
1/52
Next page
EN-10 2007/A www.dimplex.eu
English Operation
Timer week program
The timer is pre-programmed at the factory.
See table for factory settings.
The ON time (comfort mode) is displayed with ON and
the set comfort temperature.
The OFF time (energy saving mode) is displayed with
OFF.
Four time blocks are available per day.
These can be adapted individually for each weekday.
To change these time blocks, carry out the following
steps:
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key. The auxiliary HEATING sym-
bol flashes.
Select the TIMER symbol with the
key. The
TIMER symbol flashes. Press the ENTER key.
Select a weekday.
1 = Monday 5 = Friday
2 = Tuesday 6 = Saturday
3 = Wednesday 7 = Sunday
4 = Thursday
Select a day with the
keys.
Press the ENTER key. P1 (Program 1) flashes.
Press the ENTER key. Switch-on time flashes.
Use the
keys to set the hours.
Press the ENTER key. Minutes display flashes.
Use the
keys to set the minutes.
Press the ENTER key. Room temperature flashes.
Use the
keys to set the temperature.
Press the ENTER key. Switch-off time flashes.
Use the
keys to set the hours.
Press the ENTER key. Minutes display flashes.
Use the
keys to set the minutes.
Press the ENTER key. P2 (Program 2) flashes.
The programs P2, P3 and P4 can be set in the
same way.
Copying programs P1 - P4
After program P4 is set, the current weekday flashes
again.
Press the  keys to set other weekdays. The
programs P1 - P4 that have just been set are cop-
ied to the selected weekdays (1 - 7).
Frost protection
Specified frost protection temperature of 7° C.
Frost protection ON
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliary HEATING symbol flashes.
Use the
keys to select the FROST symbol.
The FROST symbol flashes.
Press the ENTER key. OFF flashes.
Press the
key. ON flashes.
Press the ENTER key. Setting is complete.
Frost protection OFF
Press and hold the Menu key for approx. three
seconds.
The display switches to the main menu.
Press the MENU key.
The auxiliary HEATING symbol flashes.
Use the
keys to select the FROST symbol.
The FROST symbol flashes.
Press the ENTER key. ON flashes.
Press the
key. OFF flashes.
Press the ENTER key. Setting is complete.
Program ON time for comfort temperature
P 1 from 06:30 to 09:30
P 2 from 11:00 to 13:00
P 3 from 15:00 to 17:00
P 4 from 18:00 to 21:00
1 2 3 4 5 6 7
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex VFE60K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex VFE60K in the language / languages: English, German as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info