798168
49
Zoom out
Zoom in
Previous page
1/52
Next page
www.dimplex.eu 2007/A EN-23
Faults English
11.2. Error messages for the specialist
Deleting error messages
All error messages, with the exception of the flashing
window symbol, can be deleted as follows:
Disconnect the power supply completely.
Remove the cause of the error.
Restore the power supply.
Deleting FLASHING WINDOW
Disappears automatically after 60 minutes if the
room temperature rises.
Disappears automatically following a switch from
comfort mode to energy saving mode. See “Sim-
ple menu” on page 8.
Press the ENTER key for 10 seconds.
CAUTION!
Storage heaters may only be repaired by
qualified specialists. Repairs which are im-
properly carried out can endanger the safety
of the user.
NOTE
The devices have a high-grade thermal insulation.
Only remove the core room cover with integrated
thermal insulation when exchanging the heating ele-
ments. All other electrical components can be ac-
cessed by removing the side panels.
11.3. Resetting the temperature limiter
Allow the device to cool down sufficiently.
Open the side panel, See “Installation” on
page 15.
Actuate the reset pin with a screwdriver blade.
Mount the side panel again.
11.4. Disposal
CAUTION!
The storage heater must be de-energized
before decommissioning and dismantling.
These devices are free from asbestos and can be
completely dismantled without concerns.
According to the Electrical Equipment
Act, storage heaters must not be dis-
posed of as household waste, but must
be taken to a local disposal point.
Please store removed storage stones in
a dry place throughout the entire disposal chain, as
trace elements may otherwise entire the groundwa-
ter.
Display Cause Measures required
Flashing
window
Windows or doors are open. Draughty envi-
ronment.
Close window, avoid draught, e.g. keep doors closed.
Switch off electric fans.
E20 Room sensor or main electronics faulty Contact the service team.
E21 Core sensor or main electronics faulty Contact the service team.
E30 Ambient temperature unusually high Remove the cause of the unusually high ambient tem-
perature.
E34 Core temperature exceeded,
fan motor without function
Contact the service team.
E40 Communication fault between the operating
panel and main electronics
Check the connection cable between the operating
panel - main electronics. Contact the service team.
E62 No or incorrect signal from the central charge
control
Check signal on terminals A1+/A2- or A1~/A2~. Check
settings P9 in the installer menu.
E63 No charge release Check settings in the installer menu.
See “P13 - release manual” on page 21.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex VFE30K at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex VFE30K in the language / languages: English, German as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info