Manual Dimplex Silverton (page 30 of 43) (English, German, Dutch, French, Norwegian)

706513

Zoom out

Zoom in

1/43

Symptom Cause Corrective Action

The ame effect

will not start.

Mains plug is not plugged in.

Low water level.

Low voltage connector not connected

properly. (See Fig.5)

The Transducer Unit is not sitting

correctly in the sump

Check plug is connected to wall

socket correctly.

Check that the water tank is full and

there is water in the sump.

Check that the connector is inserted

correctly. (See Fig.5)

Ensure the Transducer in sitting down

into the moulded recess in the sump

The ame effect is

too low.

The Metal Disc in the transducer

might be dirty.

The wire from the Transducer Unit is

sitting over the metal disc

Clean the Metal Disc with soft brush

supplied. See ‘Maintenance.’ for a

step by step procedure.

Direct the wire to the back of the

sump and make sure it sits into the

side slot exiting the sump.

Unpleasant smell

when unit is used.

Dirty or stale water.

Using unltered tap water.

Clean the unit as described under

maintenance.

Use only ltered tap water.

Main lamps are

not working and

there are no

ames or smoke.

There is no water in the water tank Follow instructions under

Maintenance, ‘Filling the water tank’.

Check the plug is connected to the

wall socket correctly and that Switch

‘A’ Fig. 3 is in the ‘ON’ ( I ) position.

Troubleshooting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex Silverton in the language / languages: English, German, Dutch, French, Norwegian as an attachment in your email.

The manual is 1,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex Silverton Manual

Product: