Manual Dimplex SI 50TUR (page 27 of 72) (English, German, French)

798434

Zoom out

Zoom in

1/72

www.glendimplex.de 452237.66.55 · FD 0007 EN-7

SI 50 - 70 TUR English

7.2.2 Assembly preparation SI 70TUR

Fig. 7.2:

The hydraulic 4-way reversing valve (6) preassembled with the

actuator is fixed on a transport plate (7) inside the unit with its

threaded flanges (see Fig. 7.2 on page 7). After dismantling the

hydraulic 4-way reversing valve from the device compartment,

the transport plate (7) must be removed. The threaded flanges

of the 4-way reversing valve must be loosened. The connec-

tions elements and the flange gaskets are placed, together with

the protective filter in the accessory box (8), on the plate heat

exchanger. Two preassembled pipe assemblies (9) are placed

on the baseplate of the heat pump. These pipe assemblies must

be connected with the threaded flanges as shown in Fig. 7.3 on

page 7.

7.2.3 Assembly

Fig. 7.3:

The clearances shown in Fig. 7.3 on page 7 must be achieved

with the sealing process between the double nipple and

threaded flange on the heat pump on the one hand, and be-

tween the "heating water flow" pipe assembly and threaded

flange on the other. When the required installation position is

achieved, the flanges with the accompanying seals must be

connected with the hydraulic 4-way reversing valve using

screws, washers and spring washers.

The hydraulic 4-way reversing valve can be mounted in the four

positions shown Fig. 7.4 on page 8 to Fig. 7.7 on page 8. The

correct position of the motor control lever is pointed out again

in detail according to its installation position and depending on

the operating mode (heating or cooling).

70 148

232()

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex SI 50TUR in the language / languages: English, German, French as an attachment in your email.

The manual is 7.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dimplex SI 50TUR Manual

Product: