798433
26
Zoom out
Zoom in
Previous page
1/56
Next page
EN-10 452237.66.54a · FD 0110 www.glendimplex.de
English SI 35TUR
10 After-sales service /
maintenance
In the event of an after-sales service call, in particular for any re-
pair work on the hydraulic 4-way reversing valve, the switch box
can be folded open for better accessibility. For this process, the
two screws fixing the switch box (operator side) must be re-
moved in the switch box panel and the outer screws on the cor-
ner frame must be removed - the switch box is then supported
on the front bracket. Two support struts, incl. screws and nuts
M5, are included with the switch box in the mini-grip bag. Tilt
the switch box. Above this bracket, there are holes 5.2 in the
corner frame sections. The support struts must be secured on
these holes with screws and nuts so that the struts can still
move slightly.
Press the support struts towards the centre of the switch box so
that they engage in equivalent punched geometries in the
switch box with their "locking lugs". The inherent tension means
that the support rods move into the outer punch geometry of
the switch box and prevent the struts from coming loose on
their own.
11 Faults / troubleshooting
This heat pump is a quality product and is designed for trouble-
free operation. In the event that a fault should occur, it will be
indicated on the heat pump manager display. In this case, con-
sult the "Faults and troubleshooting" page in the operating in-
structions of the heat pump manager.
If you cannot correct the fault yourself, please contact your
after-sales service technician.
CAUTION!
!
!
Before opening the device, ensure that all circuits are
disconnected from the power supply!
After disconnecting the power supply, always wait for at least 5
minutes to allow stored electric charges to dissipate.
CAUTION!
!
!
Work on the heat pump must only be performed by
authorised and qualified after-sales service technicians.
12 Decommissioning / disposal
Before removing the heat pump, disconnect it from the power
source and close all valves. The heat pump must be dismantled
by trained personnel. All environmentally-relevant require-
ments regarding the recovery, recycling and disposal of materi-
als and components should be observed in accordance with
the applicable standards. Particular attention should be paid to
the proper disposal of refrigerants and refrigerant oils.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dimplex SI 35TUR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dimplex SI 35TUR in the language / languages: English, German, French as an attachment in your email.

The manual is 1.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info